# LulzBot Prusa

**URL:** https://forum.lulzbot.com/c/general/lulzbot-prusa/15.md

[Latest](https://forum.lulzbot.com/latest.md) · [Categories](https://forum.lulzbot.com/categories.md)

---

## [About the LulzBot Prusa category](https://forum.lulzbot.com/t/about-the-lulzbot-prusa-category/20)

<div class="topic-metadata">

**Author:** [@system](https://forum.lulzbot.com/u/system)\
**Replies:** 0\
**Last updated:** [August 27, 2013, 11:54am UTC](https://forum.lulzbot.com/t/about-the-lulzbot-prusa-category/20 "2013-08-27T11:54:29Z")

</div>

A forum dedicated to the stock LulzBot Prusa 3D Printer

---

## [Code needed to import to other slicer and printing set up](https://forum.lulzbot.com/t/code-needed-to-import-to-other-slicer-and-printing-set-up/24124)

<div class="topic-metadata">

**Author:** [@FTWM](https://forum.lulzbot.com/u/FTWM)\
**Replies:** 2\
**Last updated:** [January 25, 2022, 2:07pm UTC](https://forum.lulzbot.com/t/code-needed-to-import-to-other-slicer-and-printing-set-up/24124 "2022-01-25T14:07:08Z")

</div>

I want to use other software because Cura is wigging out on my macbook pro. I built a Linux Ubuntu steup with Prusa and Octoprinter and I am thinking about using Ultimaker software. I want to make sure the printer prof…

---

## [Upgrade Budaschnozzle 1.2 from 3mm to 1.75mm](https://forum.lulzbot.com/t/upgrade-budaschnozzle-1-2-from-3mm-to-1-75mm/4790)

<div class="topic-metadata">

**Author:** [@juergen99](https://forum.lulzbot.com/u/juergen99)\
**Replies:** 0\
**Last updated:** [April 10, 2017, 7:04pm UTC](https://forum.lulzbot.com/t/upgrade-budaschnozzle-1-2-from-3mm-to-1-75mm/4790 "2017-04-10T19:04:17Z")

</div>

Back in 2014 I built a Prusa Mendel with a Lulzbot Budaschnozzle 1.2 hot end. It has sat in my basement unused for 3 years or so. I was thinking about getting a new printer. In the mean time I decided to see if I coul…

---

## [X Axis no longer moves negative direction (resolvable)](https://forum.lulzbot.com/t/x-axis-no-longer-moves-negative-direction-resolvable/2708)

<div class="topic-metadata">

**Author:** [@devtty1](https://forum.lulzbot.com/u/devtty1)\
**Replies:** 4\
**Last updated:** [January 2, 2016, 12:40pm UTC](https://forum.lulzbot.com/t/x-axis-no-longer-moves-negative-direction-resolvable/2708 "2016-01-02T12:40:21Z")

</div>

Hello, Several weeks ago, I went to calibrate my Prusa. Things were going fine till suddenly the X axis would no longer move in the negative direction. Pressing -X steps results in no movement. Pressing Home (Using Pr…

---

## [Upgrading the firmware on the LulzBot Prusa](https://forum.lulzbot.com/t/upgrading-the-firmware-on-the-lulzbot-prusa/255)

<div class="topic-metadata">

**Author:** [@Orias](https://forum.lulzbot.com/u/Orias)\
**Replies:** 11\
**Last updated:** [September 27, 2013, 12:53am UTC](https://forum.lulzbot.com/t/upgrading-the-firmware-on-the-lulzbot-prusa/255 "2013-09-27T00:53:06Z")

</div>

We do not have a copy of the LulzBot Prusa firmware posted on download.lulzbot.com at this time. If you would like to change anything firmware related on your LulzBot Prusa you will need to start with a clean copy of the…

---

## [Needed repairs](https://forum.lulzbot.com/t/needed-repairs/253)

<div class="topic-metadata">

**Author:** [@Joseph](https://forum.lulzbot.com/u/Joseph)\
**Replies:** 2\
**Last updated:** [August 27, 2013, 3:11pm UTC](https://forum.lulzbot.com/t/needed-repairs/253 "2013-08-27T15:11:22Z")

</div>

We have a Lulzbot Prusa in need of repair. Can someone recommend somebody to do the repairs for us at a resonable fee? Thanks in advance for the assistance. Joseph