Search found 8 matches

by jamcav
Thu Jan 29, 2015 12:51 am
Forum: LulzBot TAZ
Topic: Heat Resistors Keep Burning Out
Replies: 7
Views: 2679

Re: Heat Resistors Keep Burning Out

You are right, I just figured I'd attack the problem from multiple angles in case the rambo board replacement doesn't solve my problem.
by jamcav
Wed Jan 28, 2015 1:14 am
Forum: LulzBot TAZ
Topic: Heat Resistors Keep Burning Out
Replies: 7
Views: 2679

Re: Heat Resistors Keep Burning Out

Bumpin this up, no ideas?
by jamcav
Sat Jan 24, 2015 4:15 pm
Forum: LulzBot TAZ
Topic: Heat Resistors Keep Burning Out
Replies: 7
Views: 2679

Heat Resistors Keep Burning Out

First off, I own a KITTAZ, but since there are more TAZ owners, I wanted to find out if anyone else has had this problem, or if anyone can recommend a solution. I am using Pronterface, I set the extruder temperature, usually between prints, i.e. i'm taking one print off the bed, the temp was set to ...
by jamcav
Mon Nov 17, 2014 9:09 pm
Forum: LulzBot TAZ
Topic: Any thoughts about this delamination?
Replies: 11
Views: 2907

Re: Any thoughts about this delamination?

I am having a similar issue, but I did turn off the fan and delamination still occurred. I tried with the stock profile but with the fan off, I tried with hotter bed, cooler bed, more infill, less infill, different patterns...still haven't found something that works. No problems on PLA. Should I sta...
by jamcav
Mon Nov 17, 2014 8:56 pm
Forum: KITTAZ
Topic: Power Supply running at 14.3V
Replies: 1
Views: 726

Power Supply running at 14.3V

Alright, so I don't know how, why, or what happened to my power supply. But it finished with a print, I went to set up another one and my motors weren't working correctly. I thought it was strange, so I powered everything down, turned it back on and they still weren't working right. Heard some click...
by jamcav
Sat Nov 15, 2014 2:32 pm
Forum: KITTAZ
Topic: Kittaz Build Issues
Replies: 16
Views: 6682

Re: Kittaz Build Issues

Yea, ultimately I did hammer the rod in the bearing, and used pliers as my 'spacer'. It would be great if there was a plastic spacer with a washer on it or something that would go around the bearing that you could hammer against. This would be a good addition to the kit. I will send an e-mail with m...
by jamcav
Thu Nov 13, 2014 5:37 pm
Forum: KITTAZ
Topic: Kittaz Build Issues
Replies: 16
Views: 6682

Re: Kittaz Build Issues

I am still having too much friction on my Z axis, I wish there was an easy way to measure this to see just how far off my build is from the norm. Any tips on how to reduce this friction?
by jamcav
Wed Nov 12, 2014 11:12 pm
Forum: KITTAZ
Topic: Kittaz Build Issues
Replies: 16
Views: 6682

Kittaz Build Issues

I would like to first start off with the good...it appears nothing was damaged in shipping, and the organization of parts was overall good. I was happy with the electrical setup and overall I'm glad that i did this build. With that said, i was surprised at how involved the build was, and it took muc...