Search found 95 matches

by Rp1030
Sun Oct 20, 2019 8:04 am
Forum: Hardware
Topic: Odd Manual Stepper Movement after Marlin 1.1.6+
Replies: 4
Views: 813

Re: Odd Manual Stepper Movement after Marlin 1.1.6+

I finally have a few minutes to play with this.

I got the firmware successfully installed and I still have the same problem with stepper movement..
by Rp1030
Mon Oct 14, 2019 7:46 pm
Forum: Hardware
Topic: Optical Sensor Probe Project
Replies: 4
Views: 649

Re: Optical Sensor Probe Project

This is awesome! Nice work! I'm curious though how the toolhead moves rapidly towards home and nicely slows down before hitting the endstop, I've never seen that behavior before. Thanks. All of the movement outside of the G29 command is done with my start Gcode. I've highlighted in red where my mov...
by Rp1030
Sun Oct 13, 2019 3:37 pm
Forum: Hardware
Topic: Odd Manual Stepper Movement after Marlin 1.1.6+
Replies: 4
Views: 813

Re: Odd Manual Stepper Movement after Marlin 1.1.6+

I am still working on this and one part of the firmware is and has been making me wonder.. Line 601 - 603 in Configuration H where I define my stepper driver. "a4988 is assumed for undefined drivers" so if I leave this commented, well you know what that means. The option to define stepper drivers wa...
by Rp1030
Mon Aug 26, 2019 7:39 pm
Forum: Hardware
Topic: Odd Manual Stepper Movement after Marlin 1.1.6+
Replies: 4
Views: 813

Re: Odd Manual Stepper Movement after Marlin 1.1.6+

Thanks. Will try this soon
by Rp1030
Sat Aug 24, 2019 9:05 am
Forum: LulzBot TAZ
Topic: Luzbot 5 Single, printing in squiggles
Replies: 3
Views: 483

Re: Luzbot 5 Single, printing in squiggles

My best guess would say that your e-steps are off, and/or your nozzle diameter may have changed with the new hotend.
I could be wrong, since you just changed your hotend, I don't think you have a clogged nozzle.
also check your z-hight and make sure that you're not printing too far from the bed.
by Rp1030
Sun Aug 18, 2019 6:52 pm
Forum: Hardware
Topic: Odd Manual Stepper Movement after Marlin 1.1.6+
Replies: 4
Views: 813

Odd Manual Stepper Movement after Marlin 1.1.6+

I thought that creating a specific thread for my situation would help. Outsourcing if you will call it that, so... Upon installing Marlin 1.1.6 and/or 1.1.9 I ham having issues with the movement of my steppers (in any axis direction). There is a delay after each input from the encoder, and each inpu...
by Rp1030
Mon Aug 12, 2019 7:10 pm
Forum: Software
Topic: Latest Firmware for TAZ5 - advanced development version
Replies: 185
Views: 45517

Re: Latest Firmware for TAZ5 - advanced development version

I have a TAZ 5 with Openrails mod on X and Y axis, stepper sound dampers, and a newly installed Hardened Steel Nozzle and my very own Optical Proximity Sensor. My printer is currently running with great success: Marlin 1.1.0-RC2 (from the Latest Marlin with G29 Development thread) I just can't seem ...
by Rp1030
Sun Aug 11, 2019 1:39 pm
Forum: Software
Topic: Latest Firmware for TAZ5 - advanced development version
Replies: 185
Views: 45517

Re: Latest Firmware for TAZ5 - advanced development version

Are there any new developments with marlin? 1.1.9 will not agree with my printer, even with days/hours of tinkering. I can navigate on my LCD just fine but when it comes to manual axis moving, nothing works right... And I haven't even tried printing with this firmware yet... Is anyone else running t...
by Rp1030
Wed Jul 10, 2019 7:48 pm
Forum: Software
Topic: Help - Cant Print Taz 5 After Cura 3.6.13
Replies: 9
Views: 884

Re: Help - Cant Print Taz 5 After Cura 3.6.13

I was having nearly the same problem when upgrading, using a custom machine and custom nozzle size. I had to make sure in the Printer Settings that my Nozzle size was correct and my Filament Diameter was also correct. Also I had to make sure that the print quality matched the size of my Nozzle. (I h...
by Rp1030
Thu Jul 04, 2019 9:18 am
Forum: Hardware
Topic: Optical Sensor Probe Project
Replies: 4
Views: 649

Gcode and Firmwaree

Firmware adjustments needed: - - - - - - - - - - - - - - - Your Z_MIN_ENDSTOP_INVERTING within your firmware needs to be set to False (Here are my offsets (using the mount adapted to the X-rails mod) X_PROBE_OFFSET_FROM_EXTRUDER -14 Y_PROBE_OFFSET_FROM_EXTRUDER 127 Z_PROBE_OFFSET_FROM_EXTRUDER 0 (I ...