Search found 42 matches

by caylan
Mon Jan 22, 2018 9:48 am
Forum: Hardware
Topic: Aerostruder chewing up PLA... Anyone else?
Replies: 11
Views: 1932

Re: Aerostruder chewing up PLA... Anyone else?

I'd like to know if others are having issues, too.
by caylan
Wed Nov 02, 2016 2:37 pm
Forum: LulzBot TAZ
Topic: Partial Surface Over Infill Holes - Filament Pulled Back
Replies: 0
Views: 7855

Partial Surface Over Infill Holes - Filament Pulled Back

Hi, I'm seeing filament pulled back when the solid layer makes a return path and the turnaround point is over a "hole" above the infill. Are there any easy ways to fix this? My plan is to change the Infill > External Fill Pattern to Concentric (from Rectilinear). That should prevent the curl in most...
by caylan
Thu Jun 16, 2016 12:42 pm
Forum: LulzBot TAZ
Topic: Improving the flexydually cleaning and leveling
Replies: 2
Views: 1365

Re: Improving the flexydually cleaning and leveling

Thanks for the post.
by caylan
Wed Jun 15, 2016 11:41 am
Forum: LulzBot TAZ
Topic: Taz 6 - Mandatory Bed Leveling?
Replies: 10
Views: 3937

Re: Taz 6 - Mandatory Bed Leveling?

libby wrote:...I completely revamped the g-code for the cleaning routine, and my leveling has been much more consistent.
Care to share the g-code?
by caylan
Wed Jun 15, 2016 11:01 am
Forum: LulzBot TAZ
Topic: Taz 6 - Mandatory Bed Leveling?
Replies: 10
Views: 3937

Re: Taz 6 - Mandatory Bed Leveling?

Even with bed leveling I'm seeing inconsistent levels because of some leftover filament on the nozzle post-wipe. In a perfect world it's metal on metal and the nozzle doesn't move the bed, but I've seen the nozzle push the washer down until it closes the electrical circuit. If I let it finish probin...
by caylan
Tue Jun 14, 2016 7:01 pm
Forum: LulzBot TAZ
Topic: Taz 6 - Mandatory Bed Leveling?
Replies: 10
Views: 3937

Taz 6 - Mandatory Bed Leveling?

I'd like to save time by not probing every print. Is there an option or workflow to remember bed leveling details for next print?
by caylan
Tue Jun 14, 2016 6:57 pm
Forum: LulzBot TAZ
Topic: Taz 6 toolhead wobble
Replies: 11
Views: 3128

Re: Taz 6 toolhead wobble

I've contacted support about this. My first V2.1 toolhead didn't wobble much. The flexystruder was solid. Then I received an RMA V2.1 and it wobbled much more than the original. Support said this was normal. I received a full Taz 6 RMA and there is some wobble, but not as much as the first replaceme...
by caylan
Thu Jun 09, 2016 9:43 am
Forum: LulzBot TAZ
Topic: Taz 6 - Flexystruder Wipe Failure
Replies: 9
Views: 2263

Re: Taz 6 - Flexystruder Wipe Failure

Problem is, I'm seeing the voltage drop on the female header at the toolhead connector. I have a perfect connection between the male header toolhead connector (pin 3) and the extruder assembly.
by caylan
Sun Jun 05, 2016 9:22 am
Forum: LulzBot TAZ
Topic: Taz 6 - Flexystruder Wipe Failure
Replies: 9
Views: 2263

Re: Taz 6 - Flexystruder Wipe Failure

Here's a video of the voltage drop midway through the wipe.

https://www.dropbox.com/s/xf41qrzmkbjml ... 6.mov?dl=0
by caylan
Thu Jun 02, 2016 12:02 pm
Forum: LulzBot TAZ
Topic: Taz 6 - Flexystruder Wipe Failure
Replies: 9
Views: 2263

Re: Taz 6 - Flexystruder Wipe Failure

< FIRMWARE_NAME:Marlin 1.0.2.19 LulzBot Flexy SOURCE_CODE_URL:https://code.alephobjects.com/diffusion/MARLIN/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:LulzBot TAZ 6 EXTRUDER_COUNT:1 UUID:XYZ. I’ve used scotchbrite to clean the nozzle and it still fails. I used a multimeter to test the voltage at the extrud...