Search found 24 matches

by Brutal-Force
Wed Mar 01, 2017 1:46 pm
Forum: Software
Topic: Missing elements in print
Replies: 5
Views: 1180

Re: Missing elements in print

Jim is right.
by Brutal-Force
Tue Feb 28, 2017 5:19 pm
Forum: Filament
Topic: Translucent ABS?
Replies: 5
Views: 1660

Re: Translucent ABS?

https://www.matterhackers.com/store/3d-printer-filament/transparent-premium-abs-filament-1.75mm?rcode=GAT9HR&gclid=CjwKEAiA3NTFBRDKheuO6IG43VQSJAA74F776wXMkz-YT3niohawDlpuh2mDBhYiexy1iARQQwsZMBoCy2nw_wcB I would consider Nylon 910 or Nylon Bridge. Once printed it is pretty durable, and fairly transl...
by Brutal-Force
Tue Feb 14, 2017 9:30 pm
Forum: LulzBot TAZ
Topic: Dual Toolhead based on Flexion Extruders
Replies: 5
Views: 1407

Re: Dual Toolhead based on Flexion Extruders

donute, Thank you for your input. Yes, I am following your build first. I did make an alternative stabilizer because of how it was printing out, but inevitably ended back with your design as using a different version doesn't allow the fan shroud to fit. As for dual extruder familiarity, I already ha...
by Brutal-Force
Mon Feb 13, 2017 7:15 am
Forum: LulzBot TAZ
Topic: Dual Toolhead based on Flexion Extruders
Replies: 5
Views: 1407

Re: Dual Toolhead based on Flexion Extruders

donute, I ordered the Dual HT. Flexion.jpg I am still waiting on the bracket from Misumi. I am not impressed by that company. Overpriced, slow, non-responsive and overpriced shipping. I've printed out all of the parts and installed heat-serts. Parts with serts.jpg I modified the stabilizer because n...
by Brutal-Force
Mon Jan 30, 2017 2:52 pm
Forum: LulzBot TAZ
Topic: Taz 6...SHOCKING!
Replies: 10
Views: 2843

Re: Taz 6...SHOCKING!

Daniel,

Might I ask when your house was built? Is your house properly grounded?

In 1959, the NEC required houses to move from 2 prong outlets to 3 prong, grounded outlets. If your house was built before 1965, I would suspect that as a possible problem.
by Brutal-Force
Sun Jan 15, 2017 2:39 pm
Forum: LulzBot TAZ
Topic: Spool Organization Ideas
Replies: 5
Views: 1215

Re: Spool Organization Ideas

20170108_182921_HDR_Film3.jpg As you can see. 9 rolls of filament and a plug in Eva-Dry desiccant. 20170108_182904_HDR_Film3.jpg http://www.homedepot.com/p/RIDGID-22-in-Pro-Tool-Box-Black-222570/205440481 Home Depot toolbox, airtight with gasket and two latches. 20170108_182811_HDR_Film3.jpg My Pri...
by Brutal-Force
Tue Jan 03, 2017 3:37 pm
Forum: LulzBot TAZ
Topic: New Taz 6 Owner
Replies: 14
Views: 3024

Re: New Taz 6 Owner

Congrats! @robajohn: Agreed, never used C4D, and Zbrush only sparingly. I am more of a Fusion 360/Sketchup guy. @robajohn: Personally, I find ABS easier to print. @Piercet: <----------------- This man knows what he is talking about listen to him. @Piercet: My ABS prints at 235°C and Bed 70°C, but I ...
by Brutal-Force
Wed Dec 28, 2016 6:41 am
Forum: LulzBot TAZ
Topic: Layers not smooth Taz 6
Replies: 4
Views: 1192

Re: Layers not smooth Taz 6

First: I can't speak for the Taz 6, but on the Taz 5, I print at 70 degree bed temp and 235 degrees extruder temp for ABS. Second: based on your explanation, I still can't tell which was the X or Y axis, but it kind of looks like your ABS is binding up on the reel. Third: Looks like some over extrus...
by Brutal-Force
Sat Nov 12, 2016 9:07 am
Forum: LulzBot TAZ
Topic: Taz 5 to Taz 6 v2.1 upgrade
Replies: 4
Views: 1700

Re: Taz 5 to Taz 6 v2.1 upgrade

Thank you CopperTop, this is exactly what I was looking for.
by Brutal-Force
Tue Oct 11, 2016 7:05 pm
Forum: LulzBot TAZ
Topic: Simplify 3D frustration
Replies: 8
Views: 2154

Re: Simplify 3D frustration

kcchen_00 Thanks again for your input. Unfortunately for me, I have to have both unchecked. This is not that much of an inconvenience, I only have to wait until Both are at temp before I hit print. Obviously I would like to see it working as designed, but that isn't Lulzbot's mistake, it is just som...