Search found 4 matches

by tommyscanlon
Sat Feb 17, 2018 1:44 pm
Forum: LulzBot Mini
Topic: can I somehow skip, "self leveling" ???
Replies: 2
Views: 849

Re: can I somehow skip, "self leveling" ???

wow ! - what a fine response - (Z=158, etc) --- --- I saw the leveling G-code for the first time just after I posted - I saw no reference to a lower stop - I will have to crash-course myself into G-code commands - but your reply has opened up possibilities for me both to learn and to fix. --- I leve...
by tommyscanlon
Thu Feb 15, 2018 1:21 pm
Forum: LulzBot Mini
Topic: can I somehow skip, "self leveling" ???
Replies: 2
Views: 849

can I somehow skip, "self leveling" ???

my self-leveling is quite erratic - it sometimes tries to wipe then print from six inches up in the air... --- other times it does not descend the final half-inch on one (just one) of the leveling washers -- then it tries to print from half-inch off the plate... --- and about one out of ten tries --...
by tommyscanlon
Tue Jan 23, 2018 1:27 pm
Forum: LulzBot TAZ
Topic: Nozzles for Hexagon Hotend
Replies: 3
Views: 1136

Re: Nozzles for Hexagon Hotend

?? can I use a larger nozzle - .6 or .8mm on m Taz-5 for larger projects that would take 30 hours to print with the 3.5mm OEM nozzle ??? --- I assume that Cura would slice it correctly... --- a .8mm nozzle would allow five times the flow of a 3.5mm nozzle --- (64 / 12.5) --- but could the heater kee...
by tommyscanlon
Tue Nov 08, 2016 5:49 pm
Forum: LulzBot Mini
Topic: Mini not self-levelling
Replies: 9
Views: 2923

Re: Mini not self-levelling

me: taz-5 for over a year. ' just purchased a taz-mini for use on the road... I skipped the beginning, went right to expert/advanced and the nozzle skipped any leveling I had just read about and began "printing" 5 mm above the pei-surface just as you described... I fixed the trouble - but I will hav...