Search found 42 matches

by silent_ninja1
Thu May 24, 2018 12:27 pm
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8852

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

I have a I3d Titan aero pro in 1.75. What do I need to do to have to be compatible with LulzBot Cura 2.6. I created a new machine with an aerostruder head and changed filament diameter to 1.75. Now all of the filament profiles are gone. If I change it back to 3mm they reappear. If you could help th...
by silent_ninja1
Wed May 23, 2018 5:01 pm
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8852

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

After having used all 3, the Itworks std, pro, and lulzbot aerostruder extruder for awhile now, I can say conclusively that the itworks pro is probably the best of the bundle. For flexibles, I found I needed to bump temps up a good bit on the itworks3d pro partly because of the A2 nozzle being less ...
by silent_ninja1
Wed May 23, 2018 4:51 pm
Forum: LulzBot TAZ
Topic: New PEI Added
Replies: 2
Views: 300

Re: New PEI Added

Just mail it in to itworks3d, or do what I did and order a replacement heatbed, then can have a hotspare and send it in if you dont want to do it yourself. Personally, I used rapid tac rapid remover (vinyl adhesive remover) and it comes off like butter.
by silent_ninja1
Wed May 23, 2018 4:50 pm
Forum: LulzBot TAZ
Topic: Don't skimp on wiring! / Taz 5 + duet + rebuild
Replies: 17
Views: 1918

Re: Don't skimp on wiring!

Not all wire types are created equal! Different flex ratings and ampacity for say THHN vs MTW vs UF, Aluminum vs Copper. Check what you use :)
by silent_ninja1
Thu May 10, 2018 12:54 pm
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8852

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

Hope i don't step on anyone's toes here.......We received tantrims Titan Aero toolhead back from not being able to extrude flexy filaments, and the cure was to turn the tension basically all the way down. If you have too much tension on a 1.75mm flexy filament, it will push the filament around, and...
by silent_ninja1
Wed Apr 18, 2018 10:23 am
Forum: LulzBot TAZ
Topic: Bubbles Under Brand New Heated Beds (Yes Plural)
Replies: 27
Views: 2389

Re: Bubbles Under Brand New Heated Beds (Yes Plural)

FYI, i can change one in 15 minutes or so using rapid remover https://www.amazon.com/gp/product/B006RUJ2D8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Get the cshyde sheet and chances are itll outlast the machine unless you crash it. I had replaced my bed three times due to bubbling and was very hope...
by silent_ninja1
Wed Apr 18, 2018 8:10 am
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8852

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

Thanks again for the followup issues, looks like I'll hold onto my stock hotend until Lulzbot and/or E3d work out these issue. It's a shame, I was looking forward to using flexible filament, guess I'll wait a little longer. Thanks again for all the feedback. Keep in mind the itworks3d version is di...
by silent_ninja1
Tue Apr 17, 2018 8:04 am
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8852

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

I have an itworks one now. Lulzbot one arrives tomorrow. I can give more info in a week or so, but to date I have had terrible luck with flex materials on the itworks version. it just pinches and feeds out the side even at 15mm/s. Worth noting I got the 1.75mm a2 nozzle, a2 hobb, titanium heat brea...
by silent_ninja1
Thu Apr 12, 2018 11:58 am
Forum: LulzBot TAZ
Topic: Filament stuck in printer, wont budge, wont remove
Replies: 12
Views: 1967

Re: Filament stuck in printer, wont budge, wont remove

I found the bolt (singular...) that holds the extruder fan on can loosen and let the fan move away a little. Make sure its tight and pushed in close to the fins. I recently ran some CF-PC through one of mine with a nozzle temp of 280c with an insulated enclosure around the machine. Yes, I changed it...