Search found 5 matches

by TimToo
Wed Jan 21, 2015 2:27 pm
Forum: Software
Topic: Cura top layers underextruding
Replies: 2
Views: 935

Re: Cura top layers underextruding

I had the same problem when using Cura on "another brand" of printer with one of my designs. Slic3r and my TAZ 3 printed fine, but the other printer left gaps in the top layer of the same design. It looked like the last layer was never actually printed (as though there were an off-by-one error in co...
by TimToo
Wed Apr 30, 2014 11:59 pm
Forum: Software
Topic: TAZ Slic3r profiles
Replies: 35
Views: 16795

Re: TAZ Slic3r profiles

I'm curious why the fast and medium ABS profiles home both the X and Y axis AFTER a print is completed, but the fine ABS profile ONLY homes the X axis after printing. This is in both the support on and support off versions of fast ABS as well as medium ABS. Those four profiles each contain this in t...
by TimToo
Mon Apr 14, 2014 1:36 am
Forum: Hardware
Topic: Budaschnozzle and 1.75 fila
Replies: 6
Views: 2830

Re: Budaschnozzle and 1.75 fila

Having started on a shared MakerBot and Up! printers, my first several spools are all 1.75mm. It would be handy if it were easier to use up those spools. Any new spools I've ordered are 3mm, but I see no reason to neglect the 1.75mm spools I already have on hand. Having to switch filament sizes was ...
by TimToo
Fri Feb 07, 2014 11:11 pm
Forum: Filament
Topic: 1.75 filament on TAZ 2
Replies: 8
Views: 2650

Re: 1.75 filament on TAZ 2

Thanks. I'll give that a try...
by TimToo
Thu Feb 06, 2014 5:21 am
Forum: Filament
Topic: 1.75 filament on TAZ 2
Replies: 8
Views: 2650

Re: 1.75 filament on TAZ 2

The drawing says it's for the 3mm filament. I'm guessing the drawing's title is wrong. The inside diameter given in the drawing works out to just over 3mm, so the title appears to be correct and the wrong drawing was posted for 1.75mm filament? Shouldn't the inside diameter be much closer to that of...