Search found 36 matches

by Aha
Thu Oct 03, 2019 7:59 pm
Forum: Software
Topic: Pause command in Gcode for S3D
Replies: 1
Views: 102

Re: Pause command in Gcode for S3D

What was the result of this code? Try using it to print a single layer. I'm really interested in the same functionality but haven't done it yet. I'm happy to try helping with the code if you tell me what you're seeing?
by Aha
Sun Sep 08, 2019 3:53 pm
Forum: Software
Topic: Cura keeps cooling my extruder
Replies: 2
Views: 155

Re: Cura keeps cooling my extruder

If you're using the lulzbot start code as is, it's like the other poster says. It cools down to wipe, then cools down more to probe the endpoints. This is so the auto level works on the magnetic points without oozing. It heats back up after the level sequence.
by Aha
Wed Apr 03, 2019 7:54 pm
Forum: Filament
Topic: Polydissolve S1 - Total Bust
Replies: 6
Views: 1268

Re: Polydissolve S1 - Total Bust

So I'll throw in my 2 cents. Note that I recently threw up my hands in frustration and gave up for now despite spending tons of time, emails, forum posts on here and s3d, and writing a ton of custom gcode. But I had a few successful prints using the poly dissolve. Here's what I found, things I obser...
by Aha
Sun Mar 10, 2019 12:39 pm
Forum: Software
Topic: Z-axis offset woes
Replies: 11
Views: 1359

Re: Z-axis offset woes

Prenote on the youtube video, I don't think that is the reason at all. A proper bed leveling levels relative to the bed and it can be quite a bit off and still have perfect layers if it's done correctly. Also, just email lulzbot support and ask this question - they get back fast and are helpful. The...
by Aha
Sun Mar 10, 2019 12:24 pm
Forum: Software
Topic: OctoPrint disconnects after printer asks to re-Wipe
Replies: 5
Views: 845

Re: OctoPrint disconnects after printer asks to re-Wipe

Thought I'd follow up on this with my progress and with an email back from lulzbot. I'm still working on it, but this is where I'm at: 1. Tuning the autoleveling to hopefully not need rewipes (and also get a nicer level) - cleaning and fixing some connections through email directions that may help 2...
by Aha
Mon Mar 04, 2019 9:23 pm
Forum: Software
Topic: OctoPrint disconnects after printer asks to re-Wipe
Replies: 5
Views: 845

Re: OctoPrint disconnects after printer asks to re-Wipe

Thank you! I was meaning to post this myself yesterday and wasn't sure if I was going to get unlazy and post tonight, but I have exactly this problem! I'm running the Taz 6 v3 head and I'm always getting this from every test I tried. EXTREMELY frustrating! I DID have 2 related workarounds that I'd b...
by Aha
Mon Feb 04, 2019 11:26 pm
Forum: LulzBot TAZ
Topic: Homing G28 Z0 not working: why are all axes are homing???
Replies: 2
Views: 332

Re: Homing G28 Z0 not working: why are all axes are homing???

viewtopic.php?f=36&t=7280

Actually jump to this thread, think I'm wrong and others have this issue too.
by Aha
Mon Feb 04, 2019 11:25 pm
Forum: LulzBot TAZ
Topic: Improved Auto Bed Leveling TAZ 6 - Part 1
Replies: 1
Views: 343

Re: Improved Auto Bed Leveling TAZ 6 - Part 1

Cool, wish I had those working for my leveling issues right now!
by Aha
Mon Feb 04, 2019 11:19 pm
Forum: LulzBot TAZ
Topic: Dual Extruder V3 used as single extruder
Replies: 6
Views: 565

Re: Dual Extruder V3 used as single extruder

In S3d I just set one print to 0C temp and I offload the auto leveling to a single starting script so it only heats and cools once. In cura, I think you could set up a new material and then set that temp to 0 so it doesn't heat up. Though I remember I found another way to do it so it never heated up...
by Aha
Mon Feb 04, 2019 11:14 pm
Forum: LulzBot TAZ
Topic: Homing G28 Z0 not working: why are all axes are homing???
Replies: 2
Views: 332

Re: Homing G28 Z0 not working: why are all axes are homing???

While it doesn't seem like you're new, I always jump back to https://www.simplify3d.com/support/articles/3d-printing-gcode-tutorial/ for commands. I've got the Taz 6, but my working code omits the Z axis because it messes up the bed leveling. However, I used to use a separate G28 Z at some point I r...