Search found 8 matches

by jimboslice
Tue Nov 06, 2018 9:24 am
Forum: LulzBot TAZ
Topic: Top layer possible over extrusion
Replies: 2
Views: 113

Re: Top layer possible over extrusion

Great answer, thank you! I will try both of those out and see how it effects the print.
by jimboslice
Thu Nov 01, 2018 10:15 am
Forum: LulzBot TAZ
Topic: Top layer possible over extrusion
Replies: 2
Views: 113

Top layer possible over extrusion

So I've been honing in my settings to get better quality prints off my Lulzbot Taz 6 and there is one setting that has been evasive in my efforts to figure it out. From the picture I have attached you can see that the top layer of the print is kinda bubbly and looks like it is potentially over extru...
by jimboslice
Wed Oct 24, 2018 8:10 am
Forum: Hardware
Topic: Filament Guide Tube Restrainer Clip
Replies: 2
Views: 1998

Re: Filament Guide Tube Restrainer Clip

Is it possible that you still have this mod installed and could attach a photo of where you drilled the hole, my filament keeps snapping and I need a way to fix a guide tube to my toolhead, but dont want to go drilling around without knowing what im doing. Thanks!
by jimboslice
Fri Jun 08, 2018 9:31 am
Forum: LulzBot TAZ
Topic: Troubleshooting print quality
Replies: 6
Views: 363

Re: Troubleshooting print quality

Cut the speed and used a different model and with tightening the belts, I got my first quality print since all these problems started. Thanks for the responses!! NOW I'm just having one problem left with my extruder starting to have a leak right above it that results in blobs coming down. Didn't rui...
by jimboslice
Thu Jun 07, 2018 10:06 am
Forum: LulzBot TAZ
Topic: Troubleshooting print quality
Replies: 6
Views: 363

Re: Troubleshooting print quality

Sure thing I have attached the model that I used for this post if someone would be kind enough to peek a look at it. I have since tried with two other prints, with varying levels of success https://imgur.com/a/57TfbUj That is an album of the new photos. As for the stats of my current printing setup ...
by jimboslice
Wed Jun 06, 2018 9:23 am
Forum: LulzBot TAZ
Topic: Troubleshooting print quality
Replies: 6
Views: 363

Troubleshooting print quality

So recently I just replaced my extruder on my lulzbot taz 6 in an attempt to allow it to complete prints, as there were unidentified problems with the previous unit. I am able to finish prints now, but there are some issues with gaps in between layers of the prints I am trying to make. Anyone have e...
by jimboslice
Tue May 01, 2018 12:36 pm
Forum: Hardware
Topic: Problems Finishing a print
Replies: 1
Views: 185

Re: Problems Finishing a print

Here is the other image that got removed for some reason
IMG_20180428_155816.jpg
by jimboslice
Tue May 01, 2018 11:05 am
Forum: Hardware
Topic: Problems Finishing a print
Replies: 1
Views: 185

Problems Finishing a print

Hello, So I have been having issues trying to get my printer to finish a print completely. I have attached a picture of a print that failed on one of the last layers. But at the same time I would like to figure out what problems are creating this artifacting on the side of the print. These are the l...