Search found 7 matches

by Woodmanr
Sun Oct 07, 2018 8:35 pm
Forum: LulzBot TAZ
Topic: Taz 6 out of level bed
Replies: 1
Views: 163

Taz 6 out of level bed

I went to print a long item, an 8”x3” box that was positioned along the Y axis (so going front to back). As it went to lay the skirt down it started to extrude andcfilament stickingvwith the bed coming forward. It made the back corners just fine and then as it hit about 2/3 coming back, the it wasn’...
by Woodmanr
Tue Sep 25, 2018 3:01 pm
Forum: Filament
Topic: Taulman Alloy 910 layer adhesion
Replies: 5
Views: 333

Re: Taulman Alloy 910 layer adhesion

Thanks Zachah. I’ll have to try it out when home. Layer adhesion just pulled apart. I’ll also check if I had the fan on or off since.
by Woodmanr
Mon Sep 24, 2018 1:26 pm
Forum: Filament
Topic: Taulman Alloy 910 layer adhesion
Replies: 5
Views: 333

Re: Taulman Alloy 910 layer adhesion

It was in a dehydrator for 12 hours just before the print. The filament (natural color) comes out clear with no bubbles, popping, or hissing. When i had it in the moarstruder and it was a bit wet (just extruder to prime the nozzle, not printing), i could see the individual bubbles coming out and exp...
by Woodmanr
Sat Sep 22, 2018 7:54 pm
Forum: Filament
Topic: Taulman Alloy 910 layer adhesion
Replies: 5
Views: 333

Taulman Alloy 910 layer adhesion

I cannot get Alloy 910 to produce good layer adhesion. I have used the pre-made lulzbot profiles in Cura 2.3 I have tried the stock head, a titan aero (aerostruder), and a volcano (Moarstruder) head. I've printed some 20x20x60mm solid blocks. Aesthetically from the outside they look great, but as so...
by Woodmanr
Fri May 25, 2018 7:10 am
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8343

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

Thank you. Finally step by step instructions. I’ll have to try them when I’m home from work. I understand the stock filament size is 3mm and all of the materials and profiles are built with that in mind Any time I add a new Toolhead (E3D Titan aero pro. Plan on doing Carbon printing) in 1.75 all of ...
by Woodmanr
Thu May 24, 2018 7:15 pm
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8343

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

Thanks for the reply. Even if i do modify the filament profile to 1.75, i'm still not seeing it. i've exported it, reimported it, done everything i can think off. I've even tried to make a new filament from scratch, and nothing shows up. I've about throw my computer out the window in frusteration
by Woodmanr
Wed May 23, 2018 9:01 pm
Forum: LulzBot TAZ
Topic: Lulzbot Aerostruder vs itworks E3d Aerostruder
Replies: 20
Views: 8343

Re: Lulzbot Aerostruder vs itworks E3d Aerostruder

I have a I3d Titan aero pro in 1.75. What do I need to do to have to be compatible with LulzBot Cura 2.6. I created a new machine with an aerostruder head and changed filament diameter to 1.75. Now all of the filament profiles are gone. If I change it back to 3mm they reappear. If you could help tha...