Search found 14 matches

by cekuhnen
Wed Nov 14, 2018 7:09 am
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

for the vase mode also CURA shows a layer issue that is visible in the prints too
Screen Shot 2018-11-14 at 8.00.51 AM.png
IMG_0961.jpg
IMG_0962.jpg
I attached the raw cad files too
Archive.zip
(52.28 KiB) Downloaded 34 times
by cekuhnen
Tue Nov 13, 2018 9:29 pm
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

I would start with those adjustments Here some more tests with Z-seam alignment Fast print: Sharpest sharpest.jpg sharpest2.jpg From all modes best still exhibiting a lot flaws such as lines not building upon each other correctly. Shortest Shortest.jpg Shortest2.jpg this is probably the worst print...
by cekuhnen
Mon Nov 12, 2018 12:19 pm
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

My z-offset is at -1.2 but I can play with this setting more.

I remove before doing a new print any filament leftover.

We have another moarstruder at work and I will test the model there today to see if it is the model or the printer I bought refurbished.

Any other suggestion? Estep?
by cekuhnen
Mon Nov 12, 2018 8:12 am
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

I did an update (cura) and flashed the Taz 6. But the print issues mainly remain. Also the print issues between the shells on the left are the same while both are done with two different Cura versions. The image on the right shows much better results when using the standard layer thickness setting. ...
by cekuhnen
Sun Nov 11, 2018 4:38 pm
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

My Moarstruder is my favourite toolhead... I use it for most things I make... at a .2mm print height is melts everything together and makes a seriously tough product. need any help with a re-draw i'd be happy to do it - like Galadriel mentioned - a length and width in mm would let someone get it ri...
by cekuhnen
Sun Nov 11, 2018 4:36 pm
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

it had something over 9000 errors in the original model entirely around the edges where your problems were manifesting. The model was designed in Fusion 360 from Autodesk. The same model printed flawless on other 3D printers. We did another MOARstruder test today the vase mode worked well besides a...
by cekuhnen
Tue Oct 09, 2018 9:18 am
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

Here are images of the iPhone mounted scanner holder where the moarstruder worked fast and well. The usual start end issue is I’m imally present but as you can see the rest is printed very well! Good vertical walls Clean rounded corners Correct wall thickness and vertical ends B7E16AFC-17E5-48C0-8BB...
by cekuhnen
Tue Oct 09, 2018 7:33 am
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Re: Many print issues with moarstruder

Could you post the base models you are having issues with in .stl format? More often than not if something occurs consistently on the same model but the printer works okay otherwise it means that there is an issue with the base model that is causing Cura to have difficulty slicing it. Hey Galadriel...
by cekuhnen
Sat Oct 06, 2018 10:42 am
Forum: Software
Topic: Many print issues with moarstruder
Replies: 13
Views: 1687

Many print issues with moarstruder

Hi all, I used the moarstruder printing a prototype for an IPhone mounted scanning device and the result and speed was very good with clean prints. Yesterday we printed a much bigger prototype for a client project and were quite shocked by the print issues. We two days ago did many vase prints all w...
by cekuhnen
Fri Jun 01, 2018 6:10 pm
Forum: Software
Topic: MOARstruder Vase Mode print issues
Replies: 3
Views: 423

Re: MOARstruder Vase Mode print issues

I use polymaker white PLA

After few layers the shape prints fine again.
It seems that vase code produces problematic gcode based on tracks it prints