Search found 249 matches

by rufu5
Wed Apr 17, 2019 2:52 pm
Forum: LulzBot TAZ
Topic: How to print a smooth surface?
Replies: 1
Views: 27

Re: How to print a smooth surface?

One thing I recommend in this kind of situation is loading the gcode to SD card and then printing from SD.
by rufu5
Tue Jun 05, 2018 7:05 pm
Forum: LulzBot TAZ
Topic: Large Shifts on my prints
Replies: 12
Views: 780

Re: Large Shifts on my prints

When you push the carriages check and make sure it's smooth over the range of the axis. If there is too much drag it can skip. Also, you can turn down the acceleration through the LCD and that can sometimes make a print finish that skipped before with the same gcode.
by rufu5
Fri Feb 16, 2018 4:09 pm
Forum: LulzBot Mini
Topic: Error: MINTEMP triggered, system stopped! Heater_ID: 0
Replies: 9
Views: 4323

Re: Error: MINTEMP triggered, system stopped! Heater_ID: 0

One thing you can do to check if the board is damaged is switch the thermistors for the heated bed and the hotend where they plug into the board. The thermistors for these components are similar enough that you will get a reading unless the board is damaged. DO NOT attempt to heat either the hotend ...
by rufu5
Fri Jul 07, 2017 3:09 pm
Forum: Hardware
Topic: Modify CAD files to create STL's
Replies: 4
Views: 1122

Re: Modify CAD files to create STL's

Here's a file that might work with your bushings, hope this helps.
by rufu5
Fri Jul 07, 2017 9:02 am
Forum: Software
Topic: Marlin_TAZ45_Uaru_1.0.0.1 Problem compiling
Replies: 5
Views: 1282

Re: Marlin_TAZ45_Uaru_1.0.0.1 Problem compiling

Hey alias I tried it out and was able to reproduce the errors you are seeing. I was also able to upload the firmware without any errors by doing the following: Get this arduino 1.0.5 from here http://downloads.arduino.cc/arduino-1.0.5-linux64.tgz , extract it. Then get the arduino addons from here h...
by rufu5
Thu Jul 06, 2017 3:28 pm
Forum: Software
Topic: Vase mode?
Replies: 2
Views: 1276

Re: Vase mode?

Yes, if you go to the "expert" menu up top, and then "switch to full settings..." then in the "expert" menu again, go to "open expert settings". In there under "black magic" there is a checkbox that says "spiralize the outer contour".

Woo!
by rufu5
Wed Jun 28, 2017 12:09 pm
Forum: Software
Topic: Cura Lulzbot edition lag?
Replies: 15
Views: 3098

Re: Cura Lulzbot edition lag?

Check out https://code.alephobjects.com/project/profile/10/

It's still under development, but you might find something useful there anyway.

Cheers
by rufu5
Thu Jun 22, 2017 11:45 am
Forum: LulzBot TAZ
Topic: circle issue
Replies: 2
Views: 565

Re: circle issue

Hey it looks like the belts might be a little loose. Go ahead and check the tension and if they are a bit loose, tighten them like in step 2 of this ohai https://ohai.lulzbot.com/project/Final-mechanical-assembly/taz-6/ . Be careful not to over-tighten them as that can cause other issues. As far as ...
by rufu5
Fri Dec 04, 2015 10:09 pm
Forum: User's Gallery
Topic: Project Pink Mini
Replies: 14
Views: 3601

Re: Project Pink

awwwww man, I remember printing Lulzbots in all kinds of crazy colors.

I'm partial to the lime green for prototypes.

https://www.lulzbot.com/sites/default/f ... reen_0.JPG
by rufu5
Tue Oct 27, 2015 8:35 pm
Forum: Hardware
Topic: tesseract 2.0 (penteract?)
Replies: 0
Views: 810

tesseract 2.0 (penteract?)

working on a new version of this ultimaker-y lulzbot-y reprap This is version 2 of the design, some things stay, some things change. front_orthographic.png Staying: 1. Metal corner brackets. I thought about doing corner connectors a la the cat guard, but they just will never be as stiff and I like t...