Search found 51 matches

by B-Hep-Spring
Wed Jul 17, 2019 12:10 pm
Forum: LulzBot TAZ
Topic: Taz 6 Fillament real holder problems
Replies: 6
Views: 50

Re: Taz 6 Fillament real holder problems

no the material was placed correctly into the Aero strait and after 4 hrs this occurs, I am in a wheelchair and handling the material while loaded and printing is NOT an option hence the time and filament making this holder, which I thought would do the trick.. on another material it does not behave...
by B-Hep-Spring
Tue Jul 16, 2019 4:59 am
Forum: Hardware
Topic: Best Printer for Dual Extrusion
Replies: 1
Views: 70

Re: Best Printer for Dual Extrusion

I would stay away from the Sigmax, personally after having one of there printers.
by B-Hep-Spring
Tue Jul 16, 2019 4:57 am
Forum: LulzBot TAZ
Topic: Taz 6 Fillament real holder problems
Replies: 6
Views: 50

Re: Taz 6 Fillament real holder problems

yes sorry about the picture it would not rotate properly and upload, yes the way it coils the picture was after 1.5 hr print into a 7 hr print the red bits on the reel holder is a spring that pulls the filament back but this doe sent stop the coiling effect. which becomes a problem in a long print.....
by B-Hep-Spring
Mon Jul 15, 2019 1:05 pm
Forum: LulzBot TAZ
Topic: Aerostruder head Problem
Replies: 0
Views: 18

Aerostruder head Problem

Im printing some Elixir at 210 and getting these surface problems these marks are a layer deep they are not blobs its as if the head is missing a beat I dried the filament any advise would be gratefully received
by B-Hep-Spring
Mon Jul 15, 2019 1:01 pm
Forum: LulzBot TAZ
Topic: Taz 6 Fillament real holder problems
Replies: 6
Views: 50

Taz 6 Fillament real holder problems

ever since I started to use taz my filament behaves like this

i printed a special holder but it still does it any clue why..

sorry about the picture it wont rotate the proper way up
by B-Hep-Spring
Mon Jul 15, 2019 12:52 pm
Forum: LulzBot TAZ
Topic: TAZ modular bed... metal plate sags.
Replies: 27
Views: 7109

Re: TAZ modular bed... metal plate sags.

they should read this thread and give details of the stand off< I did contact them and they seemed to be vague about this issue> LULZBOT if you reading this you don't credit yourself with such a product that clearly has a design issue..
by B-Hep-Spring
Fri Jul 05, 2019 9:15 am
Forum: Software
Topic: pause printer in S3d
Replies: 4
Views: 125

Re: pause printer in S3d

b-morgan

thank you for your reply and link, defaults are set in configuration h file,, which im not looking at been there once before??. it made interesting reading so will try my line and see, thanks for the advise and link.
by B-Hep-Spring
Thu Jul 04, 2019 11:25 am
Forum: Software
Topic: pause printer in S3d
Replies: 4
Views: 125

Re: pause printer in S3d

thanks for the reply the M600 requires parameters X[pos] Y[pos] Z[relative lift] E[initial retract L[later retract distance for removal] my script in S3d based on the M0 {REPLACE "; layer 39, Z = " "\nG1 X10 Y5\nM0\n; layer 39, Z = "} so altering the script to {REPLACE "; layer 39, Z = " "\nM600\nG1...
by B-Hep-Spring
Tue Jul 02, 2019 1:02 pm
Forum: Software
Topic: pause printer in S3d
Replies: 4
Views: 125

pause printer in S3d

im wanting to pause my print at a given layer I have a script {REPLACE "; layer 39, Z = " "\nG1 X10 Y5\nM0\n; layer 39, Z = "} using the M0 command does the Taz 6 firmware support this I know prusa does not and they use M600 I know Marlin does support the M0 but depending whether Lulzbot implemented...
by B-Hep-Spring
Fri Jun 28, 2019 12:51 pm
Forum: LulzBot TAZ
Topic: [Dual Extruder v3] Filament Stops Feeding, Ruins Print, Can't get out Easily
Replies: 8
Views: 250

Re: [Dual Extruder v3] Filament Stops Feeding, Ruins Print, Can't get out Easily

looked on the shop - spec its 5v will order today thanks for the head up