Search found 9 matches

by harshabharadwaj
Thu Aug 22, 2019 4:32 pm
Forum: LulzBot TAZ
Topic: Additional Heating Resistors in TAZ4 and TAZ5
Replies: 4
Views: 656

Re: Additional Heating Resistors in TAZ4 and TAZ5

Hello,

Thanks for the reply. My aim is basically to get the filament inside the nozzle to be entirely a liquid. Usually, the filament inside the nozzle is semi- solid.
by harshabharadwaj
Mon Aug 05, 2019 4:14 pm
Forum: LulzBot TAZ
Topic: Voltage and Current measurement - TAZ 4
Replies: 1
Views: 291

Voltage and Current measurement - TAZ 4

Hello, My name is Harsha and I have TAZ4 at the lab where I work. I wanted to measure the corresponding voltage and current values for different temperatures. However, I am not able to do so. I tried placing a breadboard in between the wires of thermistor and heating resistor that go from the printe...
by harshabharadwaj
Mon Aug 05, 2019 3:56 pm
Forum: LulzBot TAZ
Topic: Additional Heating Resistors in TAZ4 and TAZ5
Replies: 4
Views: 656

Re: Additional Heating Resistors in TAZ4 and TAZ5

Hello,

Thanks for the reply. But by increasing the wattage will I not have to change the entire 3d printer setup. As in get a lot of new parts?
by harshabharadwaj
Fri Jul 12, 2019 11:14 am
Forum: LulzBot TAZ
Topic: Additional Heating Resistors in TAZ4 and TAZ5
Replies: 4
Views: 656

Additional Heating Resistors in TAZ4 and TAZ5

Hello, My name is Harsha and I have TAZ4 and TAZ5 at the lab where I work. Since, I wanted more heat, I was thinking of adding an additional heater resistor near the nozzle, so as to keep the filament more warm and liquidy. I wanted to ask how this was gonna affect the printer? Will the software sup...
by harshabharadwaj
Fri May 17, 2019 9:31 am
Forum: Filament
Topic: Filament Flow Rate Control
Replies: 6
Views: 1364

Re: Filament Flow Rate Control

You didn't mention which version of CuraLE but in 3.6.3 select Print Setup, Custom and type flow in the search box. If you don't see Flow and Initial Flow Rate under material, then from the menu select Settings, Configure setting visibility..., and check the Check all box. See the screenshot below....
by harshabharadwaj
Thu May 09, 2019 3:49 pm
Forum: Filament
Topic: Filament Flow Rate Control
Replies: 6
Views: 1364

Filament Flow Rate Control

Hello, I am currently using a TAZ 4 printer. But, I am not able to find an option in CURA LE for the flow rate control of the filament. Is it at all possible to change the extrusion rate of the filament or is it preset? If it is indeed preset, where can I check the preset extrusion rate? Thanks a lo...
by harshabharadwaj
Thu May 09, 2019 3:48 pm
Forum: Software
Topic: Filament Flow Rate Control
Replies: 1
Views: 634

Filament Flow Rate Control

Hello, I am currently using a TAZ 4 printer. But, I am not able to find an option for the flow rate control of the filament. Is it at all possible to change the extrusion rate of the filament or is it preset? If it is indeed preset, where can I check the preset extrusion rate? Thanks a lot for the h...
by harshabharadwaj
Thu May 09, 2019 3:46 pm
Forum: Software
Topic: CAD Drawings for TAZ 3 0.5 MM Nozzle
Replies: 2
Views: 772

Re: CAD Drawings for TAZ 3 0.5 MM Nozzle

Thanks an awful lot for the help. Sorry for the late reply.
by harshabharadwaj
Thu Feb 07, 2019 8:36 pm
Forum: Software
Topic: CAD Drawings for TAZ 3 0.5 MM Nozzle
Replies: 2
Views: 772

CAD Drawings for TAZ 3 0.5 MM Nozzle

Hello, I am a graduate student working on designing a slightly modified 0.5 MM TAZ 3 Nozzle. However, I am not able to find the drawings or CAD files for that particular nozzle. Could someone please help me with providing the same? . I have been searching for a while and I am not able to find them o...