Search found 4 matches

by nickkkaaaa
Mon Mar 11, 2019 10:58 am
Forum: Filament
Topic: Polydissolve S1 - Total Bust
Replies: 6
Views: 1487

Re: Polydissolve S1 - Total Bust

I'm using Polydissolve S1 with Taulman Bridge Nylon and it sticks to each other when it is printing; however when i put it in the water it seems like the nylon is falling apart and not sticking to its self. I have no problem with the Polydissolve. It was fragile when I first pulled it out but it is ...
by nickkkaaaa
Fri Mar 08, 2019 4:51 pm
Forum: Filament
Topic: How did the impossible gear turn out
Replies: 2
Views: 648

Re: How did the impossible gear turn out

I found out the problem it wasn't the material it was the settings for the infill. It was set for grid and small walls. I changed it to one of the tetrahedral and raised the thickness and it printed out beautifully. The nylon worked for me with it running at 235 I slowed down the first layer and the...
by nickkkaaaa
Thu Mar 07, 2019 2:46 pm
Forum: Filament
Topic: How did the impossible gear turn out
Replies: 2
Views: 648

How did the impossible gear turn out

I'm using Polydissolve S1 and Taulman Bridge Nylon on the prints because my boss only had n-gen and nylon filaments. I tried the n-gen and they didn't want to stick together so I tried the nylon and it stuck together but after it was in the water the part started to fall apart at the bottom of the g...
by nickkkaaaa
Thu Mar 07, 2019 2:37 pm
Forum: Filament
Topic: Taulman Bridge Nylon Brim Issue
Replies: 4
Views: 707

Re: Taulman Bridge Nylon Brim Issue

I'm using Taulman Bridge Nylon with the PolyDissolve S1 with the Lulzbot Dual Extruder Tool Head v3 on the Taz 6. The recommend print is that impossible gear and its not working out right for me. It's printing the whole thing, but it won't stay together. I let it sit in the water for a few hours so ...