Search found 3 matches

by andru
Tue Oct 29, 2019 4:56 pm
Forum: LulzBot TAZ
Topic: converting to 1.75mm filament with titan
Replies: 0
Views: 118

converting to 1.75mm filament with titan

It took me a bit to figure it out but there are some differences between the 2.85 and 1.75 versions of the titan. here are some photos of the differences and due to the height the standard 1.75 titan will not work on the taz, so I modified a 2.85mm titan. Everything you need is in the standard 2.85m...
by andru
Wed Oct 09, 2019 2:30 pm
Forum: LulzBot TAZ
Topic: Duel V3 Heat Creep Fix
Replies: 5
Views: 423

Re: Duel V3 Heat Creep Fix

I just used a spare 40mm 24v fan and had to wire the fan power into the power supply, I originally had issues with high temp filament so on all my printers they were converted to 24v cold end fans
by andru
Sun Sep 29, 2019 7:37 pm
Forum: LulzBot TAZ
Topic: Convert Aerostruder to 1.75, how?
Replies: 2
Views: 269

Re: Convert Aerostruder to 1.75, how?

I have a few aerostruders that I converted to 1.75mm The biggest issue is that the titan aero for 1.75mm filament is shorter than the 2.85mm version, this causes the fan shroud to collide with the bed leveling washers. What you need to do is modify a 2.85mm titan and drill out the heat break threads...