Search found 197 matches

by gghouck
Mon Oct 20, 2014 11:11 am
Forum: Hardware
Topic: Nozzle hitting infill
Replies: 6
Views: 1973

Re: Nozzle hitting infill

Yes, the .35 ABS fine and medium with support off
by gghouck
Sun Oct 19, 2014 10:09 pm
Forum: Hardware
Topic: Nozzle hitting infill
Replies: 6
Views: 1973

Nozzle hitting infill

When printing, especially with Slic3rs default infill pattern, my nozzle hits the infill when printing it and when simply crossing it to move to another area. It seems during infill some amount of material ends up above the level it was printed at. I'm also having a bit of a problem getting the infi...
by gghouck
Fri Oct 17, 2014 10:56 pm
Forum: LulzBot TAZ
Topic: A little stuck here.
Replies: 20
Views: 3904

Re: A little stuck here.

Massive leaps forward today. I'm printing ABS at 215C and it's working great, I wonder if my temp readings are a bit off and what I thought was 230 was higher and causing the heat creep issue. I did the PEI bet upgrade and using some aquanet I've had success. My biggest failures have been errors I m...
by gghouck
Fri Oct 10, 2014 10:19 pm
Forum: LulzBot TAZ
Topic: A little stuck here.
Replies: 20
Views: 3904

Re: A little stuck here.

Sorry about the delay, I work week-on/week-off Thursday to Wednesday and have little time to do anything but work during that stretch. I'll get back on this Thursday and see how it goes. Yes, I got a reply to my email. The email contained some things to try but I have not had a chance to try any of ...
by gghouck
Mon Oct 06, 2014 4:15 pm
Forum: LulzBot TAZ
Topic: A little stuck here.
Replies: 20
Views: 3904

Re: A little stuck here.

Manual extrusion speed is set at 300, also, I have tried various adjustments on the two screws on the extruder. I've just sent the email, thanks.
by gghouck
Sun Oct 05, 2014 3:24 pm
Forum: LulzBot TAZ
Topic: A little stuck here.
Replies: 20
Views: 3904

Re: A little stuck here.

So, I set the temp to 230 and little changed. I'm simply trying to print the small octopus abs file from the SD card, not sure exactly where to change the extrusion speed, as I've seen it in a couple places. One thing that seems wrong is that when raise the extruder and extrude in air, I don't get a...
by gghouck
Fri Oct 03, 2014 11:55 pm
Forum: LulzBot TAZ
Topic: A little stuck here.
Replies: 20
Views: 3904

A little stuck here.

I got my Taz4 a couple days ago and am a little stuck. I installed the software and have aligned the bed (not real happy with the Z-stop, seems a bit inaccurate and finicky but will work on that later). I have pronterface working and planned to start with the files on the memory card. The nozzle is ...