Search found 197 matches

by gghouck
Fri Jun 16, 2017 9:00 pm
Forum: Hardware
Topic: Need help with bed heater
Replies: 7
Views: 1348

Re: Need help with bed heater

Good, I have one of those
by gghouck
Tue Jun 13, 2017 4:54 pm
Forum: Hardware
Topic: Need help with bed heater
Replies: 7
Views: 1348

Re: Need help with bed heater

I'm not looking to replace it, I'm building my own heater and need to know what type the Rambo is set up for.
by gghouck
Tue Jun 13, 2017 12:17 pm
Forum: Hardware
Topic: Need help with bed heater
Replies: 7
Views: 1348

Re: Need help with bed heater

Do you know what type the bed thermistor is?
by gghouck
Tue Jun 13, 2017 10:59 am
Forum: Hardware
Topic: Need help with bed heater
Replies: 7
Views: 1348

Re: Need help with bed heater

Thanks, it was operator headspace and timing. I measured 1.8 once I set my meter correctly.
by gghouck
Sat Jun 10, 2017 10:07 pm
Forum: Hardware
Topic: Need help with bed heater
Replies: 7
Views: 1348

Need help with bed heater

As I mentioned in another post, I am working on extending the Y axis on my Taz4. I'm gunning for around 450mm maybe 500mm. One roadblock is the bed heater. A 300mm x 450mm 24 volt heater is a couple hundred dollars on the rare occasion I can find them. I was thinking I could build one so I got to ca...
by gghouck
Mon May 29, 2017 8:57 pm
Forum: Hardware
Topic: TAZ 5 Power supply failure
Replies: 32
Views: 7549

Re: TAZ 5 Power supply failure

I recently finished my PSU upgrade with integrated volt and amp meter. My PSU is a meanwell 500w 24 volt unit and is set to 25.3 volts. At that I have yet to see it hit 15 amps. It comes close when the bed is heating, the nozzle is heating, and I home all axis, but once the bed is up to temp it goes...
by gghouck
Mon May 29, 2017 5:31 pm
Forum: Hardware
Topic: Taz 4 modified to 5 Selling ALL my Taz CRAP!!
Replies: 5
Views: 1439

Re: Taz 4 modified to 5 Selling ALL my Taz CRAP!!

I guess not as interested in selling as they posted......
by gghouck
Sat May 27, 2017 6:55 pm
Forum: Hardware
Topic: Taz extended bed heater options
Replies: 4
Views: 1068

Taz extended bed heater options

I'm considering extending the bed of my Taz 4 to 450mm in the Y axis. My holdup at the time is with the bed heater. I priced one of the size I need and it came out to over $300. I've come up with a few options and need some advice on them: 1) Use a stock silicone heater and center it on the new glas...
by gghouck
Thu May 18, 2017 1:05 pm
Forum: Hardware
Topic: V2 toolhead fan question
Replies: 2
Views: 739

Re: V2 toolhead fan question

Yep, that was it. It wasn't working, but started working once I started digging into it. Thanks.