Search found 1109 matches

by kmanley57
Sun Mar 22, 2015 5:59 pm
Forum: Hardware
Topic: Bed Temp Change after uploading firmware on Taz5
Replies: 41
Views: 11400

Re: Bed Temp Change after uploading firmware on Taz5

Wolfie wrote:Well, I would have to say that the rebuild with the new plate was a success. Green is ABS coming out of the flexistruder, black abs from main extruder.
If you have not got more PTFE tubing to replace the length in the flexistruder when it wears out, I would recommend it soon.
by kmanley57
Sat Mar 21, 2015 4:39 pm
Forum: Software
Topic: Dual extruder firmware update issues Taz 5
Replies: 9
Views: 2152

Re: Dual extruder firmware update issues Taz 5

You need to check the box in Simply3D to reverse the Y table.(Tools, Options, Machine)

For the bleed - more retraction distance
by kmanley57
Sat Mar 21, 2015 1:09 pm
Forum: Software
Topic: Firmware/Print head questions
Replies: 2
Views: 744

Re: Firmware/Print head questions

Just remember you may need to recalibrate between firmware changes or make the calibration settings a part of the code settings you reflash with.
by kmanley57
Sat Mar 21, 2015 12:39 pm
Forum: LulzBot Mini
Topic: Filament doesn't stay on bed, gets caught up in later layers
Replies: 9
Views: 2031

Re: Filament doesn't stay on bed, gets caught up in later la

Well if you are using the Lulzbot version. you should be using the preconfigured Mini-Tax settings selected from when you selected the printer type you have. So if you click on machine button at top of Cura you should show Lulzbot Mini as the only machine listed at the top. You can not see the gcode...
by kmanley57
Sat Mar 21, 2015 12:10 pm
Forum: LulzBot Mini
Topic: Filament doesn't stay on bed, gets caught up in later layers
Replies: 9
Views: 2031

Re: Filament doesn't stay on bed, gets caught up in later la

I sounds like your bed needs cleaned. - filament not sticking. Not doing the pre-print routine - that is where bed leveling and nozzle cleaning is done (so you need to do this.) It sounds like the needed start gcode is not getting done. You do not state what software or anything you are using. Are y...
by kmanley57
Thu Mar 19, 2015 7:04 am
Forum: Hardware
Topic: Converting old TAZ 4 extruder to flexystruder
Replies: 34
Views: 8139

Re: Converting old TAZ 4 extruder to flexystruder

Yeah I converted a AO-100 extruder into a flexy about 6 months ago for this nice guy I know that works for Fenner drives and did some testing on this filament they were trying out! :D Had to use what is available at the time, and did not have access to a unused Taz or Mini! :cry: Just wish I could g...
by kmanley57
Wed Mar 18, 2015 9:13 pm
Forum: LulzBot TAZ
Topic: Replacment printed parts for the Taz 5
Replies: 13
Views: 7217

Re: Replacment printed parts for the Taz 5

Thanks yeah I have the.35 and I don't use slic3r either. I use simplify 3d. But in looking at the gcodes I can mimick what they did for the most part. Although I can't see in the gcode where the infill percentage is. I will just go with 60% that should be very solid. I think most of them are 75% bu...
by kmanley57
Wed Mar 18, 2015 8:27 pm
Forum: Filament
Topic: Roctopuses rock, but sponges sock
Replies: 13
Views: 3209

Re: Roctopuses rock, but sponges sock

Yes, that is the line/s printed around the part, you make it become an enclosure that helps protect your printed part. It does not always work, but you might try and see if it does.
by kmanley57
Wed Mar 18, 2015 8:01 pm
Forum: LulzBot TAZ
Topic: Replacment printed parts for the Taz 5
Replies: 13
Views: 7217

Re: Replacment printed parts for the Taz 5

I wanted to mention that you will need to make sure you check your nozzle size, as many of the parts that have the pre-existing gcode file are made to use the 0.5 MM nozzle. They tend to use the larger nozzle size to print them faster, but they are tweaked to run fast and give a good print result. S...
by kmanley57
Wed Mar 18, 2015 2:29 pm
Forum: Filament
Topic: Roctopuses rock, but sponges sock
Replies: 13
Views: 3209

Re: Roctopuses rock, but sponges sock

You can try and set the skirt to print as high as your part to block the layer to layer temp changes that tend to cause lifting on the corners by cool air. It is something like skirt line counts 999 in Cura expert settings.