Search found 24 matches

by beepboopclick
Sat Mar 28, 2015 8:20 pm
Forum: LulzBot Mini
Topic: replacement of green big gear
Replies: 3
Views: 1150

Re: replacement of green big gear

How to documents are at https://ohai-kit.alephobjects.com/group/mini/ . If you go to the LulzBot downloads page https://www.lulzbot.com/support/downloads you'll find a link to the Mini Source http://download.lulzbot.com/Mini/ , which will have all of the printable parts, plus everything else you nee...
by beepboopclick
Sat Mar 28, 2015 8:14 pm
Forum: Hardware
Topic: Significantly wrong flow rate
Replies: 6
Views: 1705

Re: Significantly wrong flow rate

Here's the modified profile with the functioning flow rate. Modified HIPS Profile.ini It's mostly the stock HIPS profile for the mini from the downloads page, except that the first layer isn't quite so dramatically different from the others and I've modified the flow rate / diameter. I did chat with...
by beepboopclick
Sat Mar 28, 2015 11:24 am
Forum: Hardware
Topic: Significantly wrong flow rate
Replies: 6
Views: 1705

Re: Significantly wrong flow rate

Piercet, I used calipers for my measurement of filament diameter. 10 places, averaged, and it was a little wider than expected, but I'd already put that into the slicer. ThomR, I would expect that for small adjustments, but when the flow rate has to be set to 60%, I would expect that it's something ...
by beepboopclick
Wed Mar 25, 2015 4:33 pm
Forum: Hardware
Topic: Significantly wrong flow rate
Replies: 6
Views: 1705

Significantly wrong flow rate

A few weeks ago I got a Mini, which is a delightful step up from my Solidoodle 2 that I've been struggling with for years. The prints I've gotten from it have all been beautiful, but anything that required some manner of dimensional tolerance has not worked at all. So I finally got around to debuggi...