Search found 37 matches

by jaybeckham
Tue Apr 10, 2018 9:52 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

Thanks again. I will look at your suggestions and then photo graph my results. And open a new topic. Also using the file you fixed.
by jaybeckham
Tue Apr 10, 2018 9:32 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

The print screwed up so I shut it down. Here are the setting for Quality Layer .18 Initial Layer .425 Line Width .5 Wall Line .5 Outer Wall .5 Inner Wall .5 Top/Bottom .5 Infill .5 Skirt/Brim .5 Are do I need to change Shell or Infill? These setting were there, I didn't alter anything. Using HIPS fr...
by jaybeckham
Tue Apr 10, 2018 9:15 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

Thanks

I am currently printing so can't look but how do I find the slicing settings? And what should I look for? It will finish in about an hour or less.
by jaybeckham
Tue Apr 10, 2018 8:55 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

I have cleaned my bed and getting better results. However I think the STL file has a lot of problems with it. I opened it in Silc3r program and it found and repaired a lot of them but I still have bad prints with a lot of strings as though the filament is not sticking properly to the bed. I did some...
by jaybeckham
Sun Apr 08, 2018 1:25 pm
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

Hey, thanks so much. That makes a lot of sense. Will do that on the next print.
Jay
by jaybeckham
Sun Apr 08, 2018 7:57 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

As it turns out the bed was capable of heating to 110. However, the new Cura program had 85 built into it for HIPS. Tech support were able to reproduce my problem and correct it by going to Custom and then Materials and changing the bed temp to 110. I hope that means they will be changing the variab...
by jaybeckham
Tue Apr 03, 2018 6:09 am
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Re: Cleaning Build Plate

I am using the Mini.
by jaybeckham
Mon Apr 02, 2018 3:53 pm
Forum: LulzBot Mini
Topic: Cleaning Build Plate
Replies: 12
Views: 1189

Cleaning Build Plate

How often should one clean the build plate with Alcohol?

Also I set my temp on the build plate for 110C when printing with HIPS. However, it never gets hotter than 85C. Is that an issue?
I have had problems with filament not sticking properly to the build plate.
Thanks
by jaybeckham
Sun Apr 01, 2018 11:52 am
Forum: LulzBot Mini
Topic: Resolution and Filaments
Replies: 2
Views: 544

Re: Resolution and Filaments

IMG_1123.JPG
IMG_1123.JPG (64.07 KiB) Viewed 527 times
Here is a photo
by jaybeckham
Sun Apr 01, 2018 10:52 am
Forum: LulzBot Mini
Topic: Warping
Replies: 1
Views: 318

Warping

Can someone show me what warping looks like?

Thanks