Search found 61 matches

by jlund
Thu Sep 13, 2018 2:38 am
Forum: Software
Topic: Flexydually V2 wit 0.5mm nozzle and Dual V3 experience
Replies: 0
Views: 311

Flexydually V2 wit 0.5mm nozzle and Dual V3 experience

Printing Ninjaflex and PETG with Flexydually V2 on TAZ6 with Cura 3.2.x has been unusable with the stock profile that seems unsupported/untested. So I have had to dial in a S3D based setup for a specific production project. At the same time I and my colleagues are very sorry to miss out on the wide ...
by jlund
Thu Sep 13, 2018 1:45 am
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Re: Cura 3.2.23 with flexydually v2

When making changes in the custom settings, Cura is essentially saving them as changes to the recommended profile With the layer height, Cura will do its best to try and find the middle ground for both filaments That combination explains a lot, thanks. I need to RTM but can't find one for dual mate...
by jlund
Tue Sep 11, 2018 3:56 pm
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Re: Cura 3.2.23 with flexydually v2

Another example that makes me wonder are line widths for INOVA1800 and other materials. They are all 0.5mm for TAZ6 with FlexyduallyV2 tool head having 0.6mm nozzles as I understand it. Seems a bit low and not related to real physics. S3D auto setting is 1.2 x nozzle width. Is that really a good ide...
by jlund
Tue Sep 11, 2018 2:55 pm
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Re: Cura 3.2.23 with flexydually v2

... looks like only "Custom" print setting picture got in there - here is the "Recommended" print setting picture attached.
(Notice that despite having chosen "Recommended", the slicing time is still the same, so "Custom" is actually still used when saving g-code).
by jlund
Mon Sep 10, 2018 7:44 am
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Re: Cura 3.2.23 with flexydually v2

Thank you for a helpful reply. I don't have pictures of failed prints, but the extruder 2 part would shift compared to the extruder 1 part for the entire print with an offset. 4mm for one print, then a few centimeters for one print, then completely separate 6ish centimeters. Always along the y-axis....
by jlund
Wed Sep 05, 2018 5:42 am
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Re: Cura 3.2.23 with flexydually v2

Another example is if I delete all settings with rm -rf ~/Library/Application\ Support/cura-lulzbot on mac, set up the flexydually V2 tool head and choose Inova1800 material, the profile choices are: High detail 0.15mm High speed 0.32mm Standard 0.45mm I doubt "high speed" is quicker than "Standard"...
by jlund
Tue Sep 04, 2018 6:36 am
Forum: Software
Topic: Cura 3.2.23 with flexydually v2
Replies: 14
Views: 751

Cura 3.2.23 with flexydually v2

Running with S3D as I have had no luck at work with Cura 3.2.21 in getting a decent print on our TAZ 6 w. flexydually V2 print head. An example was that the two different extruder parts would randomly shift distance to each other on the build plate *almost* every time - it is like no one had actuall...
by jlund
Tue Sep 04, 2018 2:45 am
Forum: Software
Topic: Simplify3D and Lulzbot Mini settings
Replies: 5
Views: 1720

Re: Simplify3D and Lulzbot Mini settings

Many many thanks!
by jlund
Mon Jul 16, 2018 6:57 am
Forum: Software
Topic: Simplify 3D support for TAZ6 w. flexydually V2
Replies: 6
Views: 390

Re: Simplify 3D support for TAZ6 w. flexydually V2

Thank you for the profile - we finally have a half decent experience with Flexy Dually V2, where S3D is far superior to Cura at the moment when needing to use another filament, as it is actually usable. I am sure the new Cura will be great, when it becomes more stable and featured with profile edit,...
by jlund
Mon Jul 16, 2018 12:53 am
Forum: Software
Topic: Simplify 3D support for TAZ6 w. flexydually V2
Replies: 6
Views: 390

Re: Simplify 3D support for TAZ6 w. flexydually V2

Thanks!

Regarding bed temperature I did not find another way of controlling it, other than setting the same bed temperature for each material and call the two processes "dual". I will then have single processes for single extruder use.