Search found 12 matches

by aramis
Thu Nov 17, 2016 7:45 pm
Forum: LulzBot TAZ
Topic: TAZ Head v2.1 clogging
Replies: 14
Views: 3796

Re: TAZ Head v2.1 clogging

My retraction settings are 1.25mm at 30mm/s...and I've never stripped the PLA like your picture shows. That's on a TAZ 6 w/ the v2.1 head. The only thing I can think to suggest is to check your idler setting...I actually had mine cranked too tight for a while, and would get a nasty noise from time t...
by aramis
Mon Nov 07, 2016 1:14 pm
Forum: LulzBot TAZ
Topic: Taz 6 error Probe Fail Clean Nozzle
Replies: 51
Views: 31515

Re: Taz 6 error Probe Fail Clean Nozzle

After several hundred print hours, I was having the auto-leveling fail every print. After doing the following, I've now done 12 prints in a row with a successful start every time: - make sure the frame is square per OHAI - replace my Z pad button as it was getting wonky and causing variations in hei...