Search found 58 matches
Guessing you are going to have to grab the Marlin source code from https://code.alephobjects.com/diffusion/MARLIN/ and after changing the MAXTEMP lines in the configuration file compile and upload to your RAMBo.
- Thu Mar 02, 2017 9:03 am
- Forum: Filament
- Topic: Filament not extruding right starting print
- Replies: 8
- Views: 4102
I started having the same issue with my TAZ6 so I just tweaked the starting code a tad at the end. I replaced: G1 Z2 E0 F75 ; extrude filament back into nozzle with G1 Z2 E5 F75 ; extrude filament back into nozzle < changed this so it pushes back an extra 5mm G92 E0 ; set extruder position to 0 < ad...
- Thu Mar 02, 2017 8:55 am
- Forum: LulzBot TAZ
- Topic: Will modded TAZ 5 Toolhead to Flexistruder work?
- Replies: 4
- Views: 1098
There is also an experimental flexystruder in the devel folders that popped up a few weeks ago (http://devel.lulzbot.com/TAZ/accessories/x-ray/). It uses a smooth ended grub screw to provide some push/tension on the filament to the hobbed bolt by pushing on the PTFE tube (at least this is how it app...
Just realized I had most of the pics on my phone: Two pics of my constructed print head: http://i.imgur.com/MiShG1u.jpg http://i.imgur.com/r98uPaR.jpg Favorite print to date, to-scale adult silver dragon! http://i.imgur.com/WeP9cTs.jpg Figures for my party, still working out some z-banding but getti...
What did it cost you to build the 2nd head and can you do a step by step? Or direct me to one? I didn't track it too closely, but maybe around $90. I bought multiples of many of the purchased parts for other projects so I'm really just guestimating. There are a couple minor errors I ran into in the...
I ended building a second extruder head for my .3 to use for miniatures since I didn't' want to screw around with my under warranty stock head. I printed the parts in nGen and got the rest of the parts from either itworks3d.com or the lulzbot official store. The detail at .3 is pretty darn good, I t...
- Thu Jan 12, 2017 8:37 pm
- Forum: LulzBot TAZ
- Topic: Fuse on the bed leveling circuit?
- Replies: 0
- Views: 436
I've been lurking here and soaking in everything I can about the TAZ 6 while waiting for a new extruder from customer service. Noticed posts saying that you can't clean the hot end with anything metal due to the possibility of shorting the 24v heater voltage into the 5v bed leveling circuit. Has any...
Just posting my solution in case anyone else comes across this thread. My issue was self inflicted, though my symptoms were the same. I have been slicing using the current cura (21.02) and then uploading the gcode to octopi to print. However, I copied the starting and ending GCode from the newer cur...