Search found 52 matches

by ocelot27
Fri Feb 23, 2018 1:33 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

This from pins.h in 1.0.6: /***************************************************************** * Rambo Pin Assignments ******************************************************************/ #if MB(RAMBO) #define KNOWN_BOARD #ifndef __AVR_ATmega2560__ #error Oops!  Make sure you have  'Arduino Mega 2560'...
by ocelot27
Fri Feb 23, 2018 1:21 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

So this is in lulzbot_conditionals: /*********************** AUTOLEVELING / BED PROBE *******************************/ #if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED)     #define LULZBOT_LEFT_PROBE_BED_POSITION        0     #define LULZBOT_RIGHT_PROBE_BED_POSITION     164     #def...
by ocelot27
Fri Feb 23, 2018 12:27 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

I've been editing in 1.0.6 - need to get 1.8.3 working - can't remember how to do that - the link you posted for the libraries is a bit confusing for me? The libraries are in the app package on the mac - vaguely remember following the lulzbot instructions for getting the right stuff in the right pla...
by ocelot27
Fri Feb 23, 2018 11:43 am
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

saved
by ocelot27
Fri Feb 23, 2018 11:41 am
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

question is if I change the name to taz 6 in the lulzbot config - like you changed it to taz 5 will that effect the changes you've made to the auto leveling routine you've created- or is that global for all printers? So, hopefully all I have to do is comment out the z end stop line as mentioned by m...
by ocelot27
Thu Feb 22, 2018 1:44 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

I'm thinking it would be easier to use your modded dev version (this is the rar file at the bottom of the OP correct?) and just add my Taz 6 mods - i.e. turning off the z switch as mentioned previously, thermocouple temp control etc, and changing the printer name and extruder name to Taz 6 etc - the...
by ocelot27
Thu Feb 22, 2018 12:21 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

What tells the probe to deploy? I'm just trying to conceptualize everything I will need too hunt down and change...
-john
by ocelot27
Thu Feb 22, 2018 6:16 am
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

Ok - so totally different - I have no idea how to edit the fw to change the way the Taz 6 does it's thing - would I just change the locations of the touch points? The 6 uses the nozzle itself to press the z min end stop switch which is adjacent to the back left side of the bed... then it would have ...
by ocelot27
Wed Feb 21, 2018 1:40 pm
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

I'd rather just edit my current Taz 6 fw - since I've already made some minor changes of my own - thermocouple temp control, extruder based on the itworks.com design using the Titan Aero etc, etc Does the Taz 5 have the same z min switch as the 6 - looks like an elevator push button? Obviously I hav...
by ocelot27
Wed Feb 21, 2018 11:04 am
Forum: Hardware
Topic: Taz 5 + BLTouch [Project]
Replies: 101
Views: 20427

Re: Taz 5 + BLTouch [Project]

I would love to do this mod on my Taz 6 - while the Lulzbot auto leveling is good, keeping the nozzle clean enough to give accurate touches is a PITA. I've followed along in the instructions - only question I have is how the firmware mods would be different for the 6 vs the 5 since the 6 already has...