Search found 274 matches

by Galadriel
Sat Jan 27, 2018 2:13 am
Forum: Hardware
Topic: z axis problems
Replies: 3
Views: 598

Re: z axis problems

Have you tried using the g-code command M119? This will tell you if your z max end stop is triggering prematurely.
by Galadriel
Sat Jan 27, 2018 1:26 am
Forum: Filament
Topic: NinjaFlex help needed
Replies: 16
Views: 4059

Re: NinjaFlex help needed

As kcchen_00 suggested this appears to be an issue of heat creep. A good first step to help reduce heat creep is to verify the microblower is turning on, it should come on as soon as the printer is powered on. If that checks out you can reduce your print temperature slightly, 5 degrees to start. The...
by Galadriel
Sun Jan 21, 2018 4:24 am
Forum: Hardware
Topic: Failure to extrude stepper motor quits
Replies: 3
Views: 419

Re: Failure to extrude stepper motor quits

Have you checked the small set screw on the small herringbone gear that attaches to your extruder motor? It is possible from your description that this is being caused by a loose connection between the motor and the gear.
by Galadriel
Sun Jan 21, 2018 3:56 am
Forum: Software
Topic: Cura 2.6.66 Hang/Freeze
Replies: 11
Views: 3190

Re: Cura 2.6.66 Hang/Freeze

Have either of you tried clearing your computers cache files? It might help with the lag you are experiencing. Ubuntu: https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-installation-ubuntu Debian: https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-installation-debian macOS: http...
by Galadriel
Mon Jan 15, 2018 6:16 am
Forum: Software
Topic: new manual for latest version of cura
Replies: 3
Views: 453

Re: new manual for latest version of cura

There isn't a manual for latest version, but what are you trying to figure out? There are some websites that describe what the different settings in custom print do.
by Galadriel
Sun Jan 14, 2018 5:13 am
Forum: Software
Topic: Profile Problem (beginner)
Replies: 9
Views: 3320

Re: Profile Problem (beginner)

What version of Cura are you using? The .ini format isn't compatible with the newest Cura Lulzbot Edition so that could be the issue.
by Galadriel
Sat Jan 13, 2018 11:26 pm
Forum: Software
Topic: Should I upgrade to Cura 2.6?
Replies: 1
Views: 590

Re: Should I upgrade to Cura 2.6?

Cura 2.6 has now officially rolled out in it's non-beta capacity. If you haven't switched over and are using a Taz 5 or newer I would recommend switching. There is a much more comprehensive list of settings to make adjustments to in the new Cura Lulzbot Edition. The only down side is that it does se...
by Galadriel
Sat Jan 13, 2018 11:21 pm
Forum: Filament
Topic: Strategy for finding good print settings for different PLA
Replies: 2
Views: 677

Re: Strategy for finding good print settings for different PLA

You may find this write up useful: https://all3dp.com/cura-tutorial-3d-printing/ It is a description of the different settings and what they affect in the print quality. What issues are you experiencing? A little bit more information would allow for a more detailed response of what specifically you ...