Search found 24 matches

by mbur371189
Mon Feb 19, 2018 1:59 pm
Forum: User's Gallery
Topic: Big clock
Replies: 7
Views: 3405

Re: Big clock

Ok it's done finally
20180219_093510.jpg
20180219_093433.jpg
20180101_194556.jpg
Started out looking like this
20180219_093510.jpg
by mbur371189
Thu Feb 15, 2018 7:28 pm
Forum: Hardware
Topic: Taz 5 Temperature Drops
Replies: 14
Views: 7202

Re: Taz 5 Temperature Drops

I run my taz 5 with octoprint also. I had temp issues also. Mine had to do with the thermistor. I was able to fix the one I had. It was a bad soldier joint. It read fine with the dvm but during certain movements it showed itself. You mentioned that it's a very long print does it show up at the same ...
by mbur371189
Wed Feb 14, 2018 9:27 pm
Forum: Hardware
Topic: Need 1 Proto-type off a MoarStruder
Replies: 5
Views: 2664

Re: Need 1 Proto-type off a MoarStruder

It could just be me but maybe somone else can chime in. I've never had any luck with the moar with abs. I do print with an enclosure. You might have better luck with pla. If that's an option for you. A 3hr print doesn't seem that big. I'd only use the moar on big parts that don't need tight toleranc...
by mbur371189
Mon Feb 12, 2018 1:34 pm
Forum: User's Gallery
Topic: Big clock
Replies: 7
Views: 3405

Big clock

Long time wanderer of this forum. Can't say enough good things about lulzbot products. I finally made something large and fun. I wanted a clock I could see from across the room. I ran out of washers so the outer ring isn't totally done yet plus I still have to design and print the internal part. 201...