Search found 58 matches

by B-Hep-Spring
Mon Feb 04, 2019 10:47 am
Forum: Software
Topic: Cura 3.2.32 crashing out
Replies: 3
Views: 453

Re: Cura 3.2.32 crashing out

I also have Cura for Ultimaker installed but that version is 64 bit, reluctant to delete that, will try deleteing the cache.
by B-Hep-Spring
Sun Feb 03, 2019 2:04 pm
Forum: Software
Topic: Cura 3.2.32 crashing out
Replies: 3
Views: 453

Cura 3.2.32 crashing out

Hi All

I've loaded up a STL File for my Taz 6 and when I go to save the project cura crashes out to desk top when I look at the file for the project its 0kb yes the model is quiet tall but it should handle it, any suggestions on how to get cura a little more stable.
by B-Hep-Spring
Fri Feb 01, 2019 12:13 pm
Forum: Filament
Topic: Taz 6 StD head and Corkfill
Replies: 1
Views: 225

Taz 6 StD head and Corkfill

any advise on printing with cork fill Im using the modular bed Pei side I cannot get the print to stick when it does the nozzle drags anything it touches away from the print eventually causing a clog around the nozzle,, I 'm printing at 210 and trying to keep the nozzle clean but its trying my patie...
by B-Hep-Spring
Sun Jan 20, 2019 9:59 am
Forum: Software
Topic: S3D ending script cant get G91 to work
Replies: 8
Views: 587

Re: S3D ending script cant get G91 to work

b-morgan Thank you, I'm not the most intelligent guy but i'm not stupid either, before I posted I did do some testing hence the question for help,,, I have checked the gcode and it does look like the G90 was set at the beginning of the code and the G91 was implemented at the end of the code I attach...
by B-Hep-Spring
Sat Jan 19, 2019 11:35 am
Forum: Software
Topic: S3D ending script cant get G91 to work
Replies: 8
Views: 587

Re: S3D ending script cant get G91 to work

ok done that added the +5 it dropped strait to the deck

but thanks for trying
by B-Hep-Spring
Sat Jan 19, 2019 11:04 am
Forum: Software
Topic: S3D ending script cant get G91 to work
Replies: 8
Views: 587

Re: S3D ending script cant get G91 to work

kmanley17

thank you for your patience I had not seen this put in this way before I have a number of scripts for other printers and these worked I did not realise they need to be specified like this + -..


Thank you
by B-Hep-Spring
Fri Jan 18, 2019 11:43 am
Forum: Software
Topic: S3D ending script cant get G91 to work
Replies: 8
Views: 587

Re: S3D ending script cant get G91 to work

it makes no difference on that line if I put 15mm it will drop 15 mm if I put a height grater than 20mm say 25mm it will ramp to 25mm not lift off the print to 25mm which means I have to alter this line if the print is greater than say 25mm.. look at the picture you can see the line is set to 25mm a...
by B-Hep-Spring
Thu Jan 17, 2019 2:01 pm
Forum: Software
Topic: S3D ending script cant get G91 to work
Replies: 8
Views: 587

S3D ending script cant get G91 to work

im tying to get my ending script when finished to raise up 5mm then move to x and y position but cant seem to get it to work when I look at the line G1 Z20 E-5 X-20 Y-20 F3000 and say the print height is 50mm height it is dropping to the Z20 height. its like it doesent recognise the relative positio...
by B-Hep-Spring
Tue Jan 15, 2019 10:50 am
Forum: LulzBot TAZ
Topic: Modular Bed fitting to TAZ 6
Replies: 18
Views: 1268

Re: Modular Bed fitting to TAZ 6

I made the Stoff 11mm but I have modified the corners with an extra 1mm off the ledge that holds the plate and heater plate if anyone wants to try them
by B-Hep-Spring
Sun Jan 13, 2019 2:16 pm
Forum: LulzBot TAZ
Topic: TAZ modular bed... metal plate sags.
Replies: 30
Views: 8215

Re: TAZ modular bed... metal plate sags.

I just fitted the Modular bed and made new stand offs now im using the bed I also have a sag approx. 1mm at 60deg I have this fitted to the Taz 6 I was going to make new printed corners taking the 1mm off instead of the 11mm stand offs, is there another way to stop it sagging.