# 1.75mm filament - Taz Pro

**URL:** <https://forum.lulzbot.com/t/1-75mm-filament-taz-pro/21792>\
**Category:** General\
**Created:** [June 1, 2020, 1:59am UTC](https://forum.lulzbot.com/t/1-75mm-filament-taz-pro/21792 "2020-06-01T01:59:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![phast\_enough](https://avatars.discourse-cdn.com/v4/letter/p/b5e925/32.png) [@phast\_enough](https://forum.lulzbot.com/u/phast_enough)\
**Post date:** [June 1, 2020, 1:59am UTC](https://forum.lulzbot.com/t/1-75mm-filament-taz-pro/21792/1 "2020-06-01T01:59:51Z")

</div>

I am trying to figure out how to run 1.75mm filament in the printer. I read the article below, and am having problems with Cura. I created a copy of the standard printer profile and renamed for 1.75mm.

Now i am trying to import the Material Profiles. I have exported a few of the standard material profiles from the orginal printer. Then i switch to the 1.75mm printer in cura and attempt to import the material profiles. It states that the profiles is imported sucessfully, but there is nothing listed. When i try to create a NEW material profile Cura Crashes every time.

> **[1.75mm 3D Printing Filament Help | LulzBot 3D Printer Help](https://www.lulzbot.com/learn/tutorials/tips-and-tricks-printing-175mm-filament)**
>
> Read this LulzBot 3D printer help guide and learn how to use 1.75mm 3D printing filament successfully in a printer that is designed to use 3mm filament.