# 3D-Fuel Material files?

**URL:** <https://forum.lulzbot.com/t/3d-fuel-material-files/26719>\
**Category:** General\
**Created:** [June 1, 2024, 6:25pm UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719 "2024-06-01T18:25:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mhristau](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/mhristau/32/9696_2.png) [@mhristau](https://forum.lulzbot.com/u/mhristau)\
**Post date:** [June 1, 2024, 6:25pm UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719/1 "2024-06-01T18:25:05Z")

</div>

Just installed Cura Edition 4.13.10 (rather different from what I’ve been using past few years) and current firmware.

The Material lists 3D-Fuel **Standard** PLA+ only.

Where do I find 3D-Fuel **Pro** PLA material profile file for import? Link or Share please

---

<div class="post-metadata">

**Author:** ![WhereNerdyIsCool](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wherenerdyiscool/32/11794_2.png) [@WhereNerdyIsCool](https://forum.lulzbot.com/u/WhereNerdyIsCool)\
**Post date:** [June 3, 2024, 12:54am UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719/2 "2024-06-03T00:54:08Z")

</div>

Honestly, I would Duplicate the Generic PLA one and do some calibrations to make your own.

Great resource - [https://teachingtechyt.github.io/calibration.html](https://teachingtechyt.github.io/calibration.html)

---

<div class="post-metadata">

**Author:** ![zenotek](https://avatars.discourse-cdn.com/v4/letter/z/ad7895/32.png) [@zenotek](https://forum.lulzbot.com/u/zenotek)\
**Post date:** [June 4, 2024, 12:28am UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719/3 "2024-06-04T00:28:58Z")

</div>

> <https://gitlab.com/lulzbot3d/cura-le/cura-lulzbot/-/blob/main/resources/materials/Pro_PLA_(3D-Fuel).xml.fdm_material>

---

<div class="post-metadata">

**Author:** ![TimPostma](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/timpostma/32/12492_2.png) [@TimPostma](https://forum.lulzbot.com/u/TimPostma)\
**Post date:** [June 16, 2024, 4:12pm UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719/4 "2024-06-16T16:12:20Z")

</div>

A significant amount of PLA’s. Have the same settings if not all of them so even if it’s a different brand I do the same & it’s fine

---

<div class="post-metadata">

**Author:** ![TimPostma](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/timpostma/32/12492_2.png) [@TimPostma](https://forum.lulzbot.com/u/TimPostma)\
**Post date:** [June 18, 2024, 2:14pm UTC](https://forum.lulzbot.com/t/3d-fuel-material-files/26719/5 "2024-06-18T14:14:29Z")

</div>

There should also be a option for generic PLA correct me if I’m wrong