# .5mm walls with .5mm nozzle?

**URL:** <https://forum.lulzbot.com/t/5mm-walls-with-5mm-nozzle/25546>\
**Category:** LulzBot TAZ\
**Created:** [April 11, 2023, 2:57am UTC](https://forum.lulzbot.com/t/5mm-walls-with-5mm-nozzle/25546 "2023-04-11T02:57:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alintolea](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@alintolea](https://forum.lulzbot.com/u/alintolea)\
**Post date:** [April 11, 2023, 2:57am UTC](https://forum.lulzbot.com/t/5mm-walls-with-5mm-nozzle/25546/1 "2023-04-11T02:57:44Z")

</div>

I am trying to print some thin walls (actually small details on a larger part) that are .5mm thick and the slicer seems to just ignore them.

I’m using a TAZ6 with a E3D Titan Aero PRO Toolhead (1.75mm fillament) and the standard brass .5mm nozzle.

The part prints fine on a different (.4mm nozzle) printer (flashforge guider 2s).

Am I missing anything here? Would this be a cura setting that I am breaking/missing?

Thanks!

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [April 11, 2023, 5:32am UTC](https://forum.lulzbot.com/t/5mm-walls-with-5mm-nozzle/25546/2 "2023-04-11T05:32:02Z")

</div>

Print thin walls option in Cura.  
 ![image](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/5632b5e5f209510fa4e658fd3b40aeeab1279471.png)