# About over the PEI sheets

**URL:** <https://forum.lulzbot.com/t/about-over-the-pei-sheets/3555>\
**Category:** LulzBot TAZ\
**Created:** [June 7, 2016, 4:00am UTC](https://forum.lulzbot.com/t/about-over-the-pei-sheets/3555 "2016-06-07T04:00:34Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![PdxSteve](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/pdxsteve/32/9403_2.png) [@PdxSteve](https://forum.lulzbot.com/u/PdxSteve)\
**Post date:** [August 3, 2016, 6:55pm UTC](https://forum.lulzbot.com/t/about-over-the-pei-sheets/3555/21 "2016-08-03T18:55:08Z")

</div>

Look at the end gCode using the advanced settings. Here’s what mine looks like (stock) for Taz 6 for the ABS Profile:

```nohighlight
M400 ; wait for moves to finish
M104 S0 ; hotend off
M107 ; fans off
G91 ; relative positioning
G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
M117 Cooling please wait ; progress indicator message
G90 ; absolute positioning
G1 Y0 F3000 ; move to cooling position
M190 S50 ; set bed to cool off
G1 Y280 F3000 ; present finished print
M84 ; steppers off
G90 ; absolute positioning
M117 Print complete ; progress indicator message

```

This line is setting it to 50C and just waits: M190 S50 ; set bed to cool off

---

<div class="post-metadata">

**Author:** ![ehermsen](https://avatars.discourse-cdn.com/v4/letter/e/ce7236/32.png) [@ehermsen](https://forum.lulzbot.com/u/ehermsen)\
**Post date:** [August 3, 2016, 7:36pm UTC](https://forum.lulzbot.com/t/about-over-the-pei-sheets/3555/22 "2016-08-03T19:36:51Z")

</div>

PdxSteve,

Thanks much for the info … I’ve created a new profile and will run a part tonight to test it out!

Best regards,

Eric

[Previous page](https://forum.lulzbot.com/t/about-over-the-pei-sheets/3555.md?page=1)