# ABS filament too hot?

**URL:** <https://forum.lulzbot.com/t/abs-filament-too-hot/2598>\
**Category:** Filament\
**Created:** [December 9, 2015, 12:55pm UTC](https://forum.lulzbot.com/t/abs-filament-too-hot/2598 "2015-12-09T12:55:47Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![LarryS](https://avatars.discourse-cdn.com/v4/letter/l/ccd318/32.png) [@LarryS](https://forum.lulzbot.com/u/LarryS)\
**Post date:** [December 20, 2015, 4:38pm UTC](https://forum.lulzbot.com/t/abs-filament-too-hot/2598/21 "2015-12-20T16:38:14Z")

</div>

Thanks for this post & responses!

Before I started, I was thinking this would be a pretty challenging print for day 2 with our TAZ 5. I was just about to make a post since I am having a similar problem.

We were using Gizmo Dorks green ABS at 225 / 110. (extrusion sounds a little cool after doing more reading, but small parts were coming out nice)

We’ll try cranking up the extrusion to at least 240 next time, bed to 115 & probably see about disabling the material fan.

 ![LED enclosure.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/5d3a06b8db7d725b217dc0413fd134cc2d09d5b3.jpeg)  
 ![LED enclosure Delam.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/a/a2bf78c67a6399cb60ba6ca42c14245f21392fe2.jpeg)

[Previous page](https://forum.lulzbot.com/t/abs-filament-too-hot/2598.md?page=1)