# Accurate Bed Level Aid

**URL:** <https://forum.lulzbot.com/t/accurate-bed-level-aid/1097>\
**Category:** Hardware\
**Created:** [December 28, 2014, 2:17am UTC](https://forum.lulzbot.com/t/accurate-bed-level-aid/1097 "2014-12-28T02:17:48Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![edlink](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/edlink/32/29_2.png) [@edlink](https://forum.lulzbot.com/u/edlink)\
**Post date:** [January 9, 2015, 11:18am UTC](https://forum.lulzbot.com/t/accurate-bed-level-aid/1097/10 "2015-01-09T11:18:51Z")

</div>

> [@inventabuild](#):
>
> EdLink,
> 
> What are the units on your gauge? Is that a 0.07 mm difference between the center and side of the glass?

Here’s the whole thread: [Adjustable heat bed - glass mount](https://forum.lulzbot.com/t/adjustable-heat-bed-glass-mount/38/1)

In inches the difference was 0.007 from edge to center. But that’s with the added weight of the gauge.

I’ve scrapped that mount in favor of a different style. There’s no way my mount will work with a different dial indicator.  
I went with something more similar to this one: [http://www.thingiverse.com/thing:551366](http://www.thingiverse.com/thing:551366)  
I just retro-fitted that design to fit my gauge.

---

_[View the full topic](https://forum.lulzbot.com/t/accurate-bed-level-aid/1097)._