# Accurate Workhorse Enclosure Assembly Instructions

**URL:** <https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032>\
**Category:** General\
**Created:** [July 1, 2026, 6:42pm UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032 "2026-07-01T18:42:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![rodzilla](https://avatars.discourse-cdn.com/v4/letter/r/97f17d/32.png) [@rodzilla](https://forum.lulzbot.com/u/rodzilla)\
**Post date:** [July 1, 2026, 6:42pm UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032/1 "2026-07-01T18:42:08Z")

</div>

Greetings!

I am new to Lulzbot and 3D printing in general. My place of work puchased a Workhorse+ and enclosure. I don’t know if anyone else finds Lulzbot’s instructions lacking in general or not, but I am having a time just starting to the enclosure assembly. I’ve downloaded their document and right off the bat none of the parts in the package are anything like the orange brackets they show in the first step. I understand they are orange to clearly show the brackets so that’s not the issue.

Does anyone have instructions for the current enclosure that is for this printer?

Thank you in advance.

 ![brackets](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/50141aa91c728e3f86234522fe71de9a0a769ca2.jpeg)

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [July 1, 2026, 8:46pm UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032/2 "2026-07-01T20:46:28Z")

</div>

What do you have? Is it an actual lulzbot enclosure or something aftermarket/DIY?

---

<div class="post-metadata">

**Author:** ![rodzilla](https://avatars.discourse-cdn.com/v4/letter/r/97f17d/32.png) [@rodzilla](https://forum.lulzbot.com/u/rodzilla)\
**Post date:** [July 1, 2026, 9:02pm UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032/3 "2026-07-01T21:02:51Z")

</div>

It is a Lulzbot enclosure. TAZguard enclosure KT-MS0101.

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [July 2, 2026, 1:32am UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032/4 "2026-07-02T01:32:14Z")

</div>

> [@rodzilla](#):
>
> TAZguard enclosure KT-MS0101

You’re looking at the wrong assembly instructions then. Those are from the ABS+ enclosure kit.

The TAZguard instructions are on the [ohai.lulzbot.com](http://ohai.lulzbot.com) site here:  
[OHAI: Open Hardware Assembly Instructions](https://ohai.lulzbot.com/project/lulzbot-tazguard-enclosure-assembly/accessories/)

---

<div class="post-metadata">

**Author:** ![rodzilla](https://avatars.discourse-cdn.com/v4/letter/r/97f17d/32.png) [@rodzilla](https://forum.lulzbot.com/u/rodzilla)\
**Post date:** [July 2, 2026, 2:11am UTC](https://forum.lulzbot.com/t/accurate-workhorse-enclosure-assembly-instructions/28032/5 "2026-07-02T02:11:21Z")

</div>

@Wrathernaut well that’s embarrassing! 😳 I feel so dumb. I thank you kindly.