# Acetone Bath For Polisihing Up Your ABS Prints

**URL:** <https://forum.lulzbot.com/t/acetone-bath-for-polisihing-up-your-abs-prints/773>\
**Category:** Hardware\
**Created:** [August 16, 2014, 2:48am UTC](https://forum.lulzbot.com/t/acetone-bath-for-polisihing-up-your-abs-prints/773 "2014-08-16T02:48:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![inventabuild](https://avatars.discourse-cdn.com/v4/letter/i/c89c15/32.png) [@inventabuild](https://forum.lulzbot.com/u/inventabuild)\
**Post date:** [August 16, 2014, 2:48am UTC](https://forum.lulzbot.com/t/acetone-bath-for-polisihing-up-your-abs-prints/773/1 "2014-08-16T02:48:43Z")

</div>

I saw this on YouTube for polishing up ABS printed parts:

[https://www.youtube.com/watch?v=VvCEnA0NEG4](https://www.youtube.com/watch?v=VvCEnA0NEG4)

I don’t have a nice outdoor area to set up an Acetone boiling station as shown in most of the other videos on Acetone baths; hence the method in this video appeals to me. Just wondering if anyone tried this or has a better method to suggest.

---

<div class="post-metadata">

**Author:** ![nopick](https://avatars.discourse-cdn.com/v4/letter/n/7bcc69/32.png) [@nopick](https://forum.lulzbot.com/u/nopick)\
**Post date:** [August 16, 2014, 9:39pm UTC](https://forum.lulzbot.com/t/acetone-bath-for-polisihing-up-your-abs-prints/773/2 "2014-08-16T21:39:52Z")

</div>

This method works well. I have used it several times.

---

<div class="post-metadata">

**Author:** ![inventabuild](https://avatars.discourse-cdn.com/v4/letter/i/c89c15/32.png) [@inventabuild](https://forum.lulzbot.com/u/inventabuild)\
**Post date:** [August 16, 2014, 10:12pm UTC](https://forum.lulzbot.com/t/acetone-bath-for-polisihing-up-your-abs-prints/773/3 "2014-08-16T22:12:38Z")

</div>

Cool, thanks.