# AO-101 Compatibility with Cura?

**URL:** <https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597>\
**Category:** Software\
**Created:** [February 18, 2017, 9:34pm UTC](https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597 "2017-02-18T21:34:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![nbenning](https://avatars.discourse-cdn.com/v4/letter/n/ed8c4c/32.png) [@nbenning](https://forum.lulzbot.com/u/nbenning)\
**Post date:** [February 18, 2017, 9:34pm UTC](https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597/1 "2017-02-18T21:34:37Z")

</div>

Hello,

I have an AO-101 Lulzbot printer and was wondering if the Cura Slicer/G-Code software is compatible with it?

Thanks!  
Nick

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [February 20, 2017, 3:47am UTC](https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597/2 "2017-02-20T03:47:23Z")

</div>

Yes, the AOL 101 uses a Rambo board, it’s basically a 12v version of the electronics package you see in s Taz. The board itself is either the same, or a slightly order version. You would have to do some tweaking to get it working (bed size settings, feed speeds, etc) but it will definitely work

---

<div class="post-metadata">

**Author:** ![Biolumo](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/biolumo/32/9340_2.png) [@Biolumo](https://forum.lulzbot.com/u/Biolumo)\
**Post date:** [March 3, 2017, 2:33am UTC](https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597/3 "2017-03-03T02:33:55Z")

</div>

Yes, i’ve been wondering the same thing as there are 3 or 4 old AO-101 unused at the local creatorspace. Sometimes i go there to print a few things, but it being a creator space sometimes all the other printers are being used or are down for maintenance. Does anyone have a pre setup Cura profile that one could use for these? I suspect i could just tinker around with the generic reprap settings in cura, but a pre-made profle that could be used in 21.03 would be very nice. Thanks in advance.

---

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [March 3, 2017, 1:01pm UTC](https://forum.lulzbot.com/t/ao-101-compatibility-with-cura/4597/4 "2017-03-03T13:01:45Z")

</div>

> [@Biolumo](#):
>
> Yes, i’ve been wondering the same thing as there are 3 or 4 old AO-101 unused at the local creatorspace. Sometimes i go there to print a few things, but it being a creator space sometimes all the other printers are being used or are down for maintenance. Does anyone have a pre setup Cura profile that one could use for these? I suspect i could just tinker around with the generic reprap settings in cura, but a pre-made profle that could be used in 21.03 would be very nice. Thanks in advance.

There had been some on the old machine at the time the AO-101’s were in use. But when the AO-101’s were replaced with Taz printers and the Linux machine crashed and was replaced, the AO-101 profiles I had knocked together were lost.