# Auto Cleaning & Auto Leveling not Performed

**URL:** <https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946>\
**Category:** LulzBot Mini\
**Created:** [July 3, 2015, 3:24pm UTC](https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946 "2015-07-03T15:24:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ernest](https://avatars.discourse-cdn.com/v4/letter/e/c67d28/32.png) [@Ernest](https://forum.lulzbot.com/u/Ernest)\
**Post date:** [July 3, 2015, 3:24pm UTC](https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946/1 "2015-07-03T15:24:37Z")

</div>

I don’t know what the problem is but my Lulzbot Mini will not auto level and clean if in Cura I go to Expert and click switch to full settings. Then I use the basic one. When I press print, my printer will skip the normal routine and start printing. But when it prints it is printing in the air. (4mm above the bed) Everything works perfectly if I print with the quick print settings. Please help me as soon as possible. Thanks

---

<div class="post-metadata">

**Author:** ![garfong](https://avatars.discourse-cdn.com/v4/letter/g/22d042/32.png) [@garfong](https://forum.lulzbot.com/u/garfong)\
**Post date:** [July 3, 2015, 3:43pm UTC](https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946/2 "2015-07-03T15:43:46Z")

</div>

Have you tried loading a profile from here?  
[https://www.lulzbot.com/support/mini-cura-profiles](https://www.lulzbot.com/support/mini-cura-profiles)

---

<div class="post-metadata">

**Author:** ![Ernest](https://avatars.discourse-cdn.com/v4/letter/e/c67d28/32.png) [@Ernest](https://forum.lulzbot.com/u/Ernest)\
**Post date:** [July 3, 2015, 3:56pm UTC](https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946/3 "2015-07-03T15:56:20Z")

</div>

Thank you!

---

<div class="post-metadata">

**Author:** ![jim2386](https://avatars.discourse-cdn.com/v4/letter/j/6bbea6/32.png) [@jim2386](https://forum.lulzbot.com/u/jim2386)\
**Post date:** [July 6, 2015, 4:42pm UTC](https://forum.lulzbot.com/t/auto-cleaning-auto-leveling-not-performed/1946/4 "2015-07-06T16:42:39Z")

</div>

You must load the posted profiles anytime you switch to expert mode. It’s what tells the printer to auto level and nozzle clean.