# Autoleveling does not level the print bed..

**URL:** <https://forum.lulzbot.com/t/autoleveling-does-not-level-the-print-bed/2003>\
**Category:** LulzBot Mini\
**Created:** [July 15, 2015, 9:08pm UTC](https://forum.lulzbot.com/t/autoleveling-does-not-level-the-print-bed/2003 "2015-07-15T21:08:04Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![eteson](https://avatars.discourse-cdn.com/v4/letter/e/ecb155/32.png) [@eteson](https://forum.lulzbot.com/u/eteson)\
**Post date:** [July 15, 2015, 9:08pm UTC](https://forum.lulzbot.com/t/autoleveling-does-not-level-the-print-bed/2003/1 "2015-07-15T21:08:04Z")

</div>

Dear friends, After a couple of weeks of use I have noticed that the auto leveling in the MINI printer does not level phisically the plate but generates a equation to move the extrusor up and down during the printing process.  
Is there a way to level phisically the plate to avoid the z motors work up and down during the printing?  
In my particular case the print bed is about 1.5mm lower in the right side than in the left side.  
Thank you so much  
Eliseo

---

_[View the full topic](https://forum.lulzbot.com/t/autoleveling-does-not-level-the-print-bed/2003)._