# bed level changing

**URL:** <https://forum.lulzbot.com/t/bed-level-changing/667>\
**Category:** Hardware\
**Created:** [July 2, 2014, 6:21pm UTC](https://forum.lulzbot.com/t/bed-level-changing/667 "2014-07-02T18:21:50Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![t0b1as1](https://avatars.discourse-cdn.com/v4/letter/t/a9adbd/32.png) [@t0b1as1](https://forum.lulzbot.com/u/t0b1as1)\
**Post date:** [July 2, 2014, 6:21pm UTC](https://forum.lulzbot.com/t/bed-level-changing/667/1 "2014-07-02T18:21:50Z")

</div>

Hi,

Is it normal for bed level to change a bit after a print?  
I find that it there is different tension when pulling a piece of paper from under the nozzle before and after use…

---

_[View the full topic](https://forum.lulzbot.com/t/bed-level-changing/667)._