# Bed Leveling Fails at 2nd Washer

**URL:** <https://forum.lulzbot.com/t/bed-leveling-fails-at-2nd-washer/3249>\
**Category:** LulzBot Mini\
**Created:** [April 5, 2016, 6:55pm UTC](https://forum.lulzbot.com/t/bed-leveling-fails-at-2nd-washer/3249 "2016-04-05T18:55:12Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![koniglar](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/koniglar/32/63_2.png) [@koniglar](https://forum.lulzbot.com/u/koniglar)\
**Post date:** [April 5, 2016, 6:55pm UTC](https://forum.lulzbot.com/t/bed-leveling-fails-at-2nd-washer/3249/1 "2016-04-05T18:55:12Z")

</div>

I had to abort a print that had a problem an hour in. I reset the Mini and restarted the print, but at the 2nd washer the X axis is not advancing far enough to position the nozzle over the washer.

 ![IMG_7444.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/bdc15946d0e6fcc09b3244af2eae40d8a7a9b1ee.jpeg)  
I shut off the Mini, powered it back on, and the jog controls will allow me to move the X axis over enough to put the nozzle over the washer.  
Any ideas what would cause this, and how to correct it?

---

_[View the full topic](https://forum.lulzbot.com/t/bed-leveling-fails-at-2nd-washer/3249)._