# Bed leveling issue

**URL:** https://forum.lulzbot.com/t/bed-leveling-issue/6438
**Category:** LulzBot Mini
**Created:** [January 16, 2019, 1:16pm UTC](https://forum.lulzbot.com/t/bed-leveling-issue/6438 "2019-01-16T13:16:48Z")
**Posts on this page:** 1
**Showing post:** 1

<div class="post-metadata">

### Author: ![Zchad](https://avatars.discourse-cdn.com/v4/letter/z/b5e925/32.png) [@Zchad](https://forum.lulzbot.com/u/Zchad)
#### Post date: [January 16, 2019, 1:16pm UTC](https://forum.lulzbot.com/t/bed-leveling-issue/6438/1 "2019-01-16T13:16:48Z")

</div>

Yesterday my mini was printing perfect but when I loaded a new item and tried printing it began to have bed leveling issues. It will clean the nozzle fine, but when it begins to level with the sensors it never touches them. It raises about 10mm and each corner and then starts printing in midair. I attached a video of the same issue. [https://youtu.be/lKUdi1fF6z4](https://youtu.be/lKUdi1fF6z4)  
I tried replacing the extruder switching to my aerostruder still same issue.  
Tried loading an old gcode from a past print same issue.  
The last thing I tried was download an old version of cura but still finding the same issue.

---

_[View the full topic](https://forum.lulzbot.com/t/bed-leveling-issue/6438)._