# Beltmount replacement

**URL:** <https://forum.lulzbot.com/t/beltmount-replacement/4896>\
**Category:** LulzBot Mini\
**Created:** [May 15, 2017, 8:56pm UTC](https://forum.lulzbot.com/t/beltmount-replacement/4896 "2017-05-15T20:56:56Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![mrvanes](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/mrvanes/32/103_2.png) [@mrvanes](https://forum.lulzbot.com/u/mrvanes)\
**Post date:** [May 15, 2017, 8:56pm UTC](https://forum.lulzbot.com/t/beltmount-replacement/4896/1 "2017-05-15T20:56:56Z")

</div>

I’ve never been happy with the tight separation between the belt mounts and the belt. The hex screws rub the belt near the pully and visibly wear it down. So, I sat down and created a version with the hex screws positioned 2mm further away from the belt. [http://www.thingiverse.com/thing:2322340](http://www.thingiverse.com/thing:2322340)

Before

 ![IMG_20170515_145329.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/0/063b7414d06f01cd7b3c02124b4abf2e049e5a95.jpeg)  
After  
 ![IMG_20170515_215221.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/b6fcdeb23f1f0a0d2bd9dcbec010023e9497ecf2.jpeg)  
 ![Screenshot_20170528_165532.png](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/8/816c04803d8dc02cd3ff920635792f146f0227d1.png)  
Updated stl’s, I made an X- and Y-axis version, due to frame rubbing near the Y-idler mount.  
[BeltMount\_X-axis.stl](https://forum.lulzbot.com/uploads/short-url/2AzD1c76myNfI78yyA1JZRgfcdK.stl) (75.5 KB)  
[BeltMount\_Y-axis.stl](https://forum.lulzbot.com/uploads/short-url/8Z3ntoIGEl1vM9x6hChAHLjs2HP.stl) (75.3 KB)

---

_[View the full topic](https://forum.lulzbot.com/t/beltmount-replacement/4896)._