# Best Print Control

**URL:** <https://forum.lulzbot.com/t/best-print-control/3980>\
**Category:** Software\
**Created:** [September 13, 2016, 12:35am UTC](https://forum.lulzbot.com/t/best-print-control/3980 "2016-09-13T00:35:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jolasa1](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jolasa1](https://forum.lulzbot.com/u/jolasa1)\
**Post date:** [September 13, 2016, 12:35am UTC](https://forum.lulzbot.com/t/best-print-control/3980/1 "2016-09-13T00:35:14Z")

</div>

Best print control for Taz 6?

1. Cura  
or
2. MatterControl

---

<div class="post-metadata">

**Author:** ![simwah](https://avatars.discourse-cdn.com/v4/letter/s/439d5e/32.png) [@simwah](https://forum.lulzbot.com/u/simwah)\
**Post date:** [September 14, 2016, 1:12am UTC](https://forum.lulzbot.com/t/best-print-control/3980/2 "2016-09-14T01:12:36Z")

</div>

octoprint [http://octoprint.org/](http://octoprint.org/)