# Better prints

**URL:** <https://forum.lulzbot.com/t/better-prints/6469>\
**Category:** Software\
**Created:** [February 1, 2019, 2:32am UTC](https://forum.lulzbot.com/t/better-prints/6469 "2019-02-01T02:32:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mathewsprints](https://avatars.discourse-cdn.com/v4/letter/m/6bbea6/32.png) [@Mathewsprints](https://forum.lulzbot.com/u/Mathewsprints)\
**Post date:** [February 1, 2019, 2:32am UTC](https://forum.lulzbot.com/t/better-prints/6469/1 "2019-02-01T02:32:46Z")

</div>

New with the LulzBot taz 6 and new to Cura. I have not done anything in the Cura settings and I’m hoping for guidance to get better prints. I attached some pictures and I’m using IC3D abs. I appreciate any help

 ![image.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/2/2dfea4b8047ccd2165159a8a05133e1e45eea12d.jpeg)  
 ![image.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/0/0e9d8e0c6d953cb0c3ca1194bb69558d7be32524.jpeg)

---

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [February 14, 2019, 10:26pm UTC](https://forum.lulzbot.com/t/better-prints/6469/2 "2019-02-14T22:26:46Z")

</div>

Reach out to the support team at [LulzBot.com/Support](https://lulzbot.com/support) with more information on the slicing profile used and these images. They’ll have several recommendations for you.

---

<div class="post-metadata">

**Author:** ![ritmopat](https://avatars.discourse-cdn.com/v4/letter/r/dc4da7/32.png) [@ritmopat](https://forum.lulzbot.com/u/ritmopat)\
**Post date:** [March 24, 2019, 6:35am UTC](https://forum.lulzbot.com/t/better-prints/6469/3 "2019-03-24T06:35:08Z")

</div>

how about for the rest of us with the same issues can they just post the ‘fix’