# Calibrating/Adjusting the Mini (Can't print hollow pyramid)

**URL:** https://forum.lulzbot.com/t/calibrating-adjusting-the-mini-cant-print-hollow-pyramid/3688
**Category:** LulzBot Mini
**Created:** [July 5, 2016, 4:45pm UTC](https://forum.lulzbot.com/t/calibrating-adjusting-the-mini-cant-print-hollow-pyramid/3688 "2016-07-05T16:45:25Z")
**Posts on this page:** 1
**Page:** 2

<div class="post-metadata">

### Author: ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)
#### Post date: [August 5, 2016, 10:50pm UTC](https://forum.lulzbot.com/t/calibrating-adjusting-the-mini-cant-print-hollow-pyramid/3688/21 "2016-08-05T22:50:43Z")

</div>

That would do the trick too!

[Previous page](https://forum.lulzbot.com/t/calibrating-adjusting-the-mini-cant-print-hollow-pyramid/3688.md?page=1)