# Control Button Missing

**URL:** <https://forum.lulzbot.com/t/control-button-missing/2803>\
**Category:** Software\
**Created:** [January 18, 2016, 10:25pm UTC](https://forum.lulzbot.com/t/control-button-missing/2803 "2016-01-18T22:25:46Z")\
**Posts on this page:** 1\
**Showing post:** 48

<div class="post-metadata">

**Author:** ![FlashInPan](https://avatars.discourse-cdn.com/v4/letter/f/e19adc/32.png) [@FlashInPan](https://forum.lulzbot.com/u/FlashInPan)\
**Post date:** [March 17, 2016, 5:44pm UTC](https://forum.lulzbot.com/t/control-button-missing/2803/48 "2016-03-17T17:44:10Z")

</div>

That TOTALLY worked! 😃 So major problem ONE solved, thanks for posting that fix. I hope others can benefit by that too.  
My only other problem is that when I print from my Mac, my models come out like blobs. Somehow, I think that will be easier to solve with more research. See photo: [Printing Blobs. Somebody Please Save me!](https://forum.lulzbot.com/t/printing-blobs-somebody-please-save-me/3145/1)

Thanks again!

> [@Firewired](#):
>
> I just got my printer up and running over the weekend and had the exact same problem with my Mac running the most current version of OS X. I followed the instructions as listed earlier in the thread of:
> 
> boot mac into recovery mode (command+r). hold it down until you see the mouse cursor  
> open
> 
> Hope that helps.

---

_[View the full topic](https://forum.lulzbot.com/t/control-button-missing/2803)._