# Cooling PLA

**URL:** <https://forum.lulzbot.com/t/cooling-pla/158>\
**Category:** LulzBot TAZ\
**Created:** [June 25, 2013, 5:26am UTC](https://forum.lulzbot.com/t/cooling-pla/158 "2013-06-25T05:26:40Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [June 25, 2013, 7:23pm UTC](https://forum.lulzbot.com/t/cooling-pla/158/9 "2013-06-25T19:23:34Z")

</div>

We carry a [12vDC Fan 40mm](https://www.lulzbot.com/?q=products/12vdc-fan-40mm) that would work well. You can use a Phoenix or TE CONNECTIVITY / BUCHANAN - terminal block plugable, 2 position, 30-12AWG connector to use with the connectors on the RAMBo board.

[Newark](http://www.newark.com/te-connectivity-buchanan/796634-2/terminal-block-pluggable-2pos-30/dp/34C9465?in_merch=true&MER=ALT_N_L5_TerminalBlocks_None)  
[Ultimachine](https://ultimachine.com/content/pluggable-terminal-block-2-contacts-508mm-green)  
[Mouser](http://eu.mouser.com/catalog/english/101/EUR/1567.pdf)

---

_[View the full topic](https://forum.lulzbot.com/t/cooling-pla/158)._