# CowTech Ciclop 3D Scanner Kit

**URL:** <https://forum.lulzbot.com/t/cowtech-ciclop-3d-scanner-kit/5195>\
**Category:** 3D Scanner Hardware\
**Created:** [September 12, 2017, 4:56pm UTC](https://forum.lulzbot.com/t/cowtech-ciclop-3d-scanner-kit/5195 "2017-09-12T16:56:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [September 12, 2017, 4:56pm UTC](https://forum.lulzbot.com/t/cowtech-ciclop-3d-scanner-kit/5195/1 "2017-09-12T16:56:01Z")

</div>

The [CowTech Ciclop 3D Scanner Kit](https://www.lulzbot.com/store/parts/cowtech-ciclop-3d-scanner-kit) is being restocked in the LulzBot store!

Similar to the earlier Ciclop by BQ, the CowTech Ciclop 3D Scanner is less expensive, supported well, and can be assembled quickly.

[![](https://www.lulzbot.com/sites/default/files/Cow_Tech_Scanner.jpg)](https://www.lulzbot.com/store/parts/cowtech-ciclop-3d-scanner-kit)

Have the new Ciclop? We’d love to see your scans and prints!

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [September 12, 2017, 8:28pm UTC](https://forum.lulzbot.com/t/cowtech-ciclop-3d-scanner-kit/5195/2 "2017-09-12T20:28:07Z")

</div>

Neat! is there a retrofit controller board kit to convert a BQ one to that style?